Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DINITROL 4941
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Anti-corrosive coating
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
DINOL GmbH
manufacturer
Pyrmonter Strasse 76, D-32676 Luegde
+49 (0) 5281 982980
http://www.dinol.com
DINOL U.S. Inc.
distributor
8500 Cotter Street, Lewis Center, USA-43035 Ohio
740-548-1656
http://www.dinol.com
Emergency Contacts
3E Company Emergency
+1-866-404-4230
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics | --- | 5 - 10% | No |
| propylene carbonate | 108-32-7 | 1 - 5% | No |
| Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatics | --- | 10 - 30% | No |
| Solvent naphtha (petroleum), light arom.; Low boiling point naphtha - unspecified | --- | 10 - 30% | No |
Hydrocarbons meet the requirements for not being classified as carcinogenic (<0,1% benzene alt<3% (w/w) DMSO extract (IP 346)).
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Change contaminated clothing. After contact with skin, wash immediately with plenty of water and soap.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. Call a physician immediately. Put victim at rest, cover with a blanket and keep warm.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire, use sand, extinguishing powder or alcohol resistant foam.
Full water jet
In case of fire may be liberated: Gases/vapours, toxic
Suppress gases/vapours/mists with water spray jet.
Firefighter Protection
Wear respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Provide adequate ventilation. Wear personal protection equipment. Avoid contact with skin, eyes and clothes. Avoid breathing dust/fume/gas/mist/vapours/spray.
Do not allow uncontrolled discharge of product into the environment.
Clear contaminated areas thoroughly. Do not rinse down with water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation as well as local exhaustion at critical locations. Use only in well-ventilated areas. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. The usual precautionary measures are to be adhered to when handling chemicals. Keep away from food, drink and animal feedingstuffs. Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands and face before breaks and after work and take a shower if necessary. When using do not eat or drink.
Keep container tightly closed.
The usual precautionary measures are to be adhered to when handling chemicals. Keep away from food, drink and animal feedingstuffs. Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands and face before breaks and after work and take a shower if necessary. When using do not eat or drink.
Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. If handled uncovered, arrangements with local exhaust ventilation should be used if possible. If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn.
Recommended glove articles : FKM (fluoro rubber), Breakthrough time:: 480 min. NBR (Nitrile rubber), Breakthrough time:: 480 min. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Protective gloves have to be replaced at the first sign of deterioration.
Eye glasses with side protection (EN 166)
Work in well-ventilated zones or use proper respiratory protection. gas filtering equipment (EN 141), Filter material/medium: A
Protect skin by using skin protective cream. Wear anti-static footwear and clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No known hazardous decomposition products.
No further relevant information available.
No known hazardous decomposition products.
No further relevant information available.
No further relevant information available.
Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1139
- Shipping Name
- COATING SOLUTION
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DINITROL 4941?
The signal word is warning.
What is the physical form of DINITROL 4941?
DINITROL 4941 is a liquid with black color. It has characteristic odor.
What is DINITROL 4941 used for?
Anti-corrosive coating
What are the hazard statements for DINITROL 4941?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
What is the melting point of DINITROL 4941?
The melting point is not determined and the boiling point is 165 - 181 °C.