Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LIAL 125 R
- Chemical Name
- Alcohols, C12-15-branched and linear
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119490230-48-0000
Identified Uses
raw material for surfactant production
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C12-15-branched and linear EC: 292-334-0 | 90604-40-3 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, lie down. If breathing is irregular or stopped, administer artificial respiration. Monitor breathing, give oxygen if necessary. Consult a physician.
Wash off with plenty of water.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Consult a physician. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Dry powder, Foam, Carbon dioxide (CO2)
High volume water jet
Dangerous gases or fumes may occur in case of fire.
Cool closed containers exposed to fire with water spray.
Firefighter Protection
Use personal protective equipment. Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not let product enter drains. Do not flush into surface water. Avoid subsoil penetration. Do not allow material to contaminate ground water system.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment.
Protect from frost, heat and sunlight.
No special protective measures against fire required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient air exchange and/or exhaust in work rooms.
Material: Nitrile rubber/nitrile latex Break through time: >= 480 min Glove thickness: 0,35 mm Material: butyl-rubber Break through time: >= 480 min Glove thickness: 0,5 mm The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature). Unsuitable material: Natural rubber/natural latex
Tightly fitting safety goggles
No personal respiratory protective equipment normally required. In inadequately ventilated areas, where workplace limits are exceeded, where unpleasant odours exist or where aerosols are in use, or smoke and mist occur, use self-contained breathing apparatus or breathing apparatus with a type A filter or appropriate combined filter (e.g. where aerosols are in use, or smoke and mist occur, A-P2 or ABEK-P2), in compliance with EN 141.
Wear suitable protective equipment.
Do not let product enter drains. Do not flush into surface water. Avoid subsoil penetration. Do not allow material to contaminate ground water system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperature and pressure.
Stable at normal ambient temperature and pressure.
Hazardous decomposition products formed under fire conditions.
Direct heating, dirt, chemical contamination, sunlight, UV or ionising radiation.
Hazardous decomposition products formed under fire conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
Bioaccumulation is unlikely for Alcohols, C12-15-branched and linear.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be PBT or vPvB at levels of 0.1% or higher. Alcohols, C12-15-branched and linear are not classified as PBT or vPvB.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
The substance is identified as very toxic to aquatic life with long lasting effects.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be incinerated, when in compliance with local regulations.
Can be incinerated, when in compliance with local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (1-Dodecanol)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LIAL 125 R?
The signal word is warning.
What is the physical form of LIAL 125 R?
LIAL 125 R is a liquid with colourless color. It has characteristic odor.
What is LIAL 125 R used for?
raw material for surfactant production
What are the hazard statements for LIAL 125 R?
This substance has 1 hazard statement:
- H410: Very toxic to aquatic life with long lasting effects.