Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DODIFLOW 5750-4/TANKCONTAINER
- Product Code
- 33012311601
- Chemical Name
- Polymer composition in a hydrocarbon solvent mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industry sector : not appointed
Manufacturers & Suppliers
Clariant Produkte (Deutschland) GmbH
65926 Frankfurt am Main
+49 69 305 18000
Emergency Contacts
Emergency Contact
00800-5121 5121
24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A | --- | 50 - 70% | Yes |
| Naphthalene (Amount coming from “Hydrocarbons, C10, aromatics”) EC: 202-049-5 | 91-20-3 | 5 - 10% | Yes |
| N/A | --- | 1 - 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical advice/ attention.
In case of contact, immediately flush skin with soap and plenty of water.
Symptoms: Repeated exposure may cause skin dryness or cracking.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed do not induce vomiting, seek medical advice and show safety datasheet or label
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet Alcohol-resistant foam Dry powder Carbon dioxide (CO2)
High volume water jet
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO) Carbon dioxide (CO2)
Firefighter Protection
Self-contained breathing apparatus. Wear suitable protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear suitable protective equipment. Ensure adequate ventilation.
The product should not be allowed to enter drains, water courses or the soil.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Treat recovered material as described in the section "Disposal considerations".
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When used and handled appropriately no special measures are needed
Keep containers tightly closed in a cool, well-ventilated place. Handle and open container with care.
Wash hands before breaks and at the end of workday. Use protective skin cream before handling the product. Take off immediately all contaminated clothing and wash it before reuse.
Observe the general rules of industrial fire protection Keep away from sources of ignition - No smoking. Vapours may form explosive mixture with air. Vapours may spread long distances and ignite.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas.
Long-term exposure: Impervious butyl rubber gloves (Break through time: 480 min, Glove thickness: 0,7 mm). For short-term exposure (splash protection): Nitrile rubber gloves (Break through time: 30 min, Glove thickness: 0,4 mm). These types of protective gloves are offered by various manufacturers. Please note the manufacturers' detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)
In the case of vapour formation use a respirator with an approved filter. Equipment should conform to EN 14387. Filter type: Organic vapour type (A). If the occupational exposure limits cannot be met, in exceptional cases suitable respiratory equipment should be worn only for a short period of time.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
None known.
not known
When handled and stored appropriately, no dangerous decomposition products are known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 3256
- Shipping Name
- Elevated temperature liquid, flammable, n.o.s.
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DODIFLOW 5750-4/TANKCONTAINER?
The signal word is warning.
What is the physical form of DODIFLOW 5750-4/TANKCONTAINER?
DODIFLOW 5750-4/TANKCONTAINER is a wax. with white, to, light brown color. It has product specific odor.
What is DODIFLOW 5750-4/TANKCONTAINER used for?
Industry sector : not appointed
What are the hazard statements for DODIFLOW 5750-4/TANKCONTAINER?
This substance has 3 hazard statements:
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of DODIFLOW 5750-4/TANKCONTAINER?
The melting point is -3 °C and the boiling point is > 178 °C (1.013,25 hPa).