Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TURMOFLUID 40 B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC24 - Lubricants, greases, release products
Manufacturers & Suppliers
Lubricant Consult GmbH
manufacturer
Gutenbergstraße 13, 63477 MAINTAL (GERMANY)
+49 6109/7650-0
Emergency Contacts
Emergency Contact
+49 6109/7650-0
Monday to Friday 8:00 AM to 4:00 PM (CET)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| O,O,O-triphenyl phosphorothioate EC: 209-909-9 | 597-82-0 | 1 - 5% | Yes |
| 2-Ethylhexyl zinc dithiophosphate EC: 224-235-5 | 4259-15-8 | 0.5 - 1% | Yes |
| N,N-bis(2-ethylhexyl)-4-methyl-1H-benzotriazol-1-methylamine EC: 279-503-4 | 80584-90-3 | 0.1 - 0.5% | Yes |
| N,N-bis(2-ethylhexyl)-5-methyl-1H-benzotriazol-1-methylamine EC: 279-514-4 | 80595-74-0 | 0.1 - 0.5% | Yes |
This mixture contains the following substances of very high concern (SVHC) which are included in the Candidate List according to Article 59 of REACH: O,O,O-triphenyl phosphorothioate. 2-Ethylhexyl zinc dithiophosphate (CAS No. 4259-15-8) is classified according to Korean law (KOSHA, Korea Occupational Safety & Health Agency). Under REACH legislation H362, H371 and H373 are not required.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician.
Remove contaminated, saturated clothing immediately. Wash immediately with: Water and soap In case of skin irritation, consult a physician.
Rinse immediately carefully and thoroughly with eye-bath or water. In case of eye irritation consult an ophthalmologist.
Rinse mouth immediately and drink plenty of water. Let water be drunken in little sips (dilution effect). Get medical advice/attention if you feel unwell.
Immediate Medical Attention
In case of respiratory tract irritation, consult a physician. In case of skin irritation, consult a physician. In case of eye irritation consult an ophthalmologist. Get medical advice/attention if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry extinguishing powder. Carbon dioxide (CO2). ABC-powder. BC-powder. Foam. Dry sand.
Water. Strong water jet. High power water jet.
Burning produces heavy smoke.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Ensure waste is collected and contained. Make sure spills can be contained, e.g. in sump pallets or kerbed areas.
Soak up inert absorbent and dispose as waste requiring special attention.
Materials: Universal binder, Kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
It is recommended to design all work processes always so that the following is excluded: Generation/formation of mist. Avoid: Inhalation of vapours or spray/mists. Skin contact, Eye contact.
Keep/Store only in original container. Keep container tightly closed. Protect against UV-radiation/sunlight. Humidity. Contact with air/oxygen. Dust deposits.
Wash hands before breaks and after work. When using do not eat, drink, smoke, sniff.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. By long-term hand contact : Tested protective gloves must be worn. Suitable material : PE (Polyethylene). NR (natural rubber, natural latex). NBR (Nitrile rubber). Breakthrough time (maximum wearing time) : PE < 30 min. ; NR < 10 min.; NBR > 480 min. Thickness of the glove material : min. 0,38 mm. Recommended glove articles : EN ISO 374; DIN EN 420 Uvex. KCL, MAPA. Or comparable articles from other companies.
Eye protection: not required. Avoid: Eye contact. Recommended eye protection articles: DIN EN 166
No special measures are necessary. Avoid: Inhalation of vapours or spray/mists
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
No information available.
Strong acid. Strong alkali.
No information available.
Oxidising agent, strong.
Carbon monoxide (CO). Nitrogen oxides (NOx). Sulphur dioxide (SO2). Carbon dioxide (CO2). Phosphorus oxides (e.g. P2O5). Gases/vapours, harmful.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Chronic (long-term) fish toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
The substance is poorly biodegradable.
12.2 Persistence and degradability
12.2 Persistence and degradability
Not readily biodegradable (according to OECD criteria).
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product contains O,O,O-triphenyl phosphorothioate, which fulfills the PBT/vPvB criteria according to REACH Annex XIII.
12.6 Endocrine disrupting properties
Endocrine disrupting potential: None known.
12.7 Other adverse effects
The product does not contain nanoparticles.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a hazardous waste incinerator facility under observation of official regulations. Collect the waste separately. Evidence for disposal must be provided.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (O,O,O-triphenyl phosphorothioate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TURMOFLUID 40 B?
The signal word is no signal word.
What is the physical form of TURMOFLUID 40 B?
TURMOFLUID 40 B is a liquid with yellow-orange color.
What is TURMOFLUID 40 B used for?
PC24 - Lubricants, greases, release products
What are the hazard statements for TURMOFLUID 40 B?
This substance has 1 hazard statement:
- H411: Toxic to aquatic life with long lasting effects.