Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Acetonitrile 50% / Water 47.5% / Trifluoroacetic acid 2.5% HiPerSolv CHROMANORM® Solution OS (Bruker Organic Solvent)
- Product Code
- 89449
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. See section 3 for EU REACH registration numbers when applicable.
Identified Uses
General chemical reagent
Uses advised against
The product, as such or as a component of a mixture, is not intended to be used by consumers (as defined by the REACH Regulation).
Manufacturers & Suppliers
VWR International Ltd.
distributor
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN, UK
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Give nothing to eat or drink.
Medical Treatment
no data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, ABC-powder, Carbon dioxide (CO2), Nitrogen
no restriction
In case of fire may be liberated: Pyrolysis products, toxic
DO NOT fight fire when fire reaches explosives. Use caution when applying carbon dioxide in confined spaces. Carbon dioxide can displace oxygen. Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing. Do not inhale explosion and combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear spills immediately. Spilled product must never be returned to the original container for recycling.
In case of major fire and large quantities: Remove persons to safety.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Acetonitrile HiPerSolv CHROMANORM® for HPLC LC-MS grade - suitable for UPLC/UHPLC instruments
CAS: 75-05-8
Chloroform HiPerSolv CHROMANORM® for HPLC
CAS: 67-66-3
UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v)
---
TRICHLOROACETIC ACID, SOLUTION
---
Chloroacetaldehyde, 40-45% Aqueous Solution
CAS: 107-20-0
3,4,5-Trichlorophenol 100 µg/mL in Acetonitrile
---
Solvent 50
---
2-(4-Chloro-2-methylphenoxy)acetic acid, 95%
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is as low as possible: Inhalation, Skin contact, Eye contact. Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.
Recommended storage temperature: 15-25 °C. Keep container tightly closed and in a well-ventilated place. Keep/Store only in original container.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 in the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: Butyl caoutchouc (butyl rubber), Thickness of the glove material: 0,30 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3779. By long-term hand contact: Suitable material: Butyl caoutchouc (butyl rubber), Thickness of the glove material: 0,30 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3779.
Eye glasses with side protection DIN-/EN-Norms EN 166. Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
no data available
no data available
no data available
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2924
- Shipping Name
- FLAMMABLE LIQUID, CORROSIVE, N.O.S. (ACETONITRILE/TRIFLUOROACETIC ACID SOLUTION)
- Transport Class
- 3 (8)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Acetonitrile 50% / Water 47.5% / Trifluoroacetic acid 2.5% HiPerSolv CHROMANORM® Solution OS (Bruker Organic Solvent)?
The signal word is danger.
What is the physical form of Acetonitrile 50% / Water 47.5% / Trifluoroacetic acid 2.5% HiPerSolv CHROMANORM® Solution OS (Bruker Organic Solvent)?
Acetonitrile 50% / Water 47.5% / Trifluoroacetic acid 2.5% HiPerSolv CHROMANORM® Solution OS (Bruker Organic Solvent) is a liquid appearing as liquid, colourless, characteristic odour with colourless color. It has characteristic odor.
What is Acetonitrile 50% / Water 47.5% / Trifluoroacetic acid 2.5% HiPerSolv CHROMANORM® Solution OS (Bruker Organic Solvent) used for?
General chemical reagent
What are the hazard statements for Acetonitrile 50% / Water 47.5% / Trifluoroacetic acid 2.5% HiPerSolv CHROMANORM® Solution OS (Bruker Organic Solvent)?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H290: May be corrosive to metals.
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.