Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PRINTPERFEKT BASE FF
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Textile auxiliary Leather auxiliary
Uses advised against
No uses advised against have been identified at this time.
Manufacturers & Suppliers
CHT Germany GmbH
manufacturer
Bismarckstraße 102, 72072 Tübingen, Germany
+49 7071 154 0
CHT Switzerland AG
manufacturer
Kriessemstrasse 20, 9462 Montlingen, Switzerland
+41 71 763 88 11
Emergency Contacts
CHEMTREC
+1 703 527 3887
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Compound based on polyurethane
Notes
No hazardous ingredients
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
Immediately flush eye(s) with plenty of water. If symptoms persist, call a physician.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Water spray, Dry powder, Foam
None known.
Hazardous decomposition products formed under fire conditions. Can be released in case of fire: Carbon oxides, Nitrogen oxides (NOx), acrylic monomeres
In case of fire do not inhale smoke, conflagration gases and steams.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Contaminated surfaces will be extremely slippery.
The product should not be allowed to enter drains, water courses or the soil. Pay attention to local or official regulations.
Soak up with inert absorbent material. Clean contaminated surface thoroughly.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide sufficient air exchange and/or exhaust in work rooms.
Do always store in containers which correspond to the original ones. Keep container tightly closed.
No special protective measures against fire required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Solids with occupational exposure limits in liquid preparations do not cause an exposure in the workplace, because they are not present in a respirable form. Exposure can occur in the form of aerosols or after drying of the liquid the solids remain, possibly in a finely dispersed form. Provide sufficient air exchange and/or exhaust in work rooms.
Material : Nitrile rubber, Break through time : > 480 min, Glove thickness : > 0.35 mm, Protective index : Class 6. Material : butyl-rubber, Break through time : > 480 min, Glove thickness : > 0.5 mm, Protective index : Class 6. Wear chemical resistant impervious gloves. Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.
Goggles. Always wear eye protection when the potential for inadvertent eye contact with the product cannot be excluded.
In case the work place is not ventilated sufficiently and during spray processing, it is necessary to wear respiratory protective equipment.
Wear suitable protective clothing. Work uniform or laboratory coat.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazardous reactions known if stored and handled properly.
No dangerous reaction known under conditions of normal use.
None, if stored and handled properly.
No incompatible materials are known for this product.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PRINTPERFEKT BASE FF?
The signal word is no signal word.
What is the physical form of PRINTPERFEKT BASE FF?
PRINTPERFEKT BASE FF is a dispersion appearing as dispersion with white color. It has characteristic odor.
What is PRINTPERFEKT BASE FF used for?
Textile auxiliary Leather auxiliary
What is the melting point of PRINTPERFEKT BASE FF?
The melting point is ca. 0 °C and the boiling point is ca. 100 °C.