Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PRINTPERFEKT LAC 77 NEU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Textile auxiliary
Manufacturers & Suppliers
CHT Germany GmbH
manufacturer
Bismarckstraße 102, 72072 Tübingen, Germany
+49 7071 154 0
CHT Switzerland AG
manufacturer
Kriessernstrasse 20, 9462 Montlingen, Switzerland
+41 71 763 88 11
CHT Belgium NV
manufacturer
Doorniksesteenweg 81B Bus 9, 8500 Kortrijk, Belgium
+32 56 203114
Emergency Contacts
CHT Germany GmbH
+49 7071 154 0
24 hours
CHT Switzerland AG
+41 71 763 88 11
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Acrylate dispersion
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aryl ethylphenyl polyglycol ether | 104376-75-2 | 1 - 2.5% | Yes |
| 2-methyl-2H-isothiazol-3-one EC: 220-239-6 | 2682-20-4 | 0.0025 - 0.025% | Yes |
| mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) | 55965-84-9 | 0.0002 - 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
Symptoms: There may be reddening, swelling associated with itching on contact.
Immediately flush eye(s) with plenty of water. If symptoms persist, call a physician.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Water spray, Dry powder, Foam
Hazardous decomposition products formed under fire conditions. Can be released in case of fire: Carbon oxides, Nitrogen oxides (NOx), acrylic monomeres
In case of fire do not inhale smoke, conflagration gases and steams.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Contaminated surfaces will be extremely slippery.
The product should not be allowed to enter drains, water courses or the soil. Pay attention to local or official regulations.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Clean contaminated surface thoroughly.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Do not breathe vapours, aerosols. Take off all contaminated clothing immediately. Handle in accordance with good industrial hygiene and safety practice.
Do always store in containers which correspond to the original ones. Keep container tightly closed. Protect from frost. Protect from temperatures below +5 °C. Protect from temperatures over +40 °C. Stir well before use.
Handle in accordance with good industrial hygiene and safety practice.
No special protective measures against fire required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Solids with occupational exposure limits in liquid preparations do not cause an exposure in the workplace, because they are not present in a respirable form. Exposure can occur in the form of aerosols or after drying of the liquid the solids remain, possibly in a finely dispersed form. Provide sufficient air exchange and/or exhaust in work rooms.
Material : Neoprene, Break through time : > 480 min, Glove thickness : > 0,5 mm, Protective index : Class 6. Remarks : The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. The obtained break through times according to EN 374 Part III are not measured under normal operating conditions. Therefore a maximum usage time of 50% of the break through time is recommended.
Goggles (EN 166)
In case the work place is not ventilated sufficiently and during spray processing, it is necessary to wear respiratory protective equipment. Recommended Filter type: Combination filter A/P (EN 141)
Wear suitable protective clothing (EN 14605).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
Not applicable
Not applicable
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Pay attention to local or official regulations.
Pay attention to local or official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Currently no information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PRINTPERFEKT LAC 77 NEU?
The signal word is warning.
What is the physical form of PRINTPERFEKT LAC 77 NEU?
PRINTPERFEKT LAC 77 NEU is a paste appearing as paste with light cream color. It has characteristic odor.
What is PRINTPERFEKT LAC 77 NEU used for?
Textile auxiliary
What are the hazard statements for PRINTPERFEKT LAC 77 NEU?
This substance has 1 hazard statement:
- H317: May cause an allergic skin reaction.
What is the melting point of PRINTPERFEKT LAC 77 NEU?
The melting point is No data available and the boiling point is No data available.