Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Speedy 500
- Product Code
- 34705
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner solvent
Manufacturers & Suppliers
KENT (United Kingdom) Ltd
manufacturer
Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US
+44 01383 723344 / 0800 136925
Emergency Contacts
Emergency Contact
+44 01383 723344
During normal office hours - Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Reaction mass of ethylbenzene and xylene EC: 905-588-0 | --- | 50 - 75% | Yes |
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclic, <2% aromatics EC: 919-857-5 | --- | 25 - 50% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness bring patient into stable side position for transport.
Instantly wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
Do not induce vomiting; instantly call for medical help.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water haze. Fight larger fires with water haze or alcohol-resistant foam.
Water with a full water jet.
Formation of toxic gases is possible during heating or in case of fire.
Cool endangered containers with water spray jet.
Firefighter Protection
Put on breathing apparatus. Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Put on breathing apparatus. Wear protective equipment. Keep unprotected persons away.
Prevent material from reaching sewage system, holes and cellars.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Keep breathing equipment ready.
Store in cool, dry conditions in well sealed containers. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Wear suitable gloves tested to EN 374. Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0.5 mm. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Value for the permeation: Level 6 > 480 minutes
Tightly sealed safety glasses. (EN 166)
Use breathing protection in case of insufficient ventilation. Filter A2 / P2 (EN 14387)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7 Other adverse effects
The product is classified as extremely hazardous for water (Water danger class 3) and poses a danger to drinking water if leaked into the soil.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage.
Must not be disposed of together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3295
- Shipping Name
- HYDROCARBONS, LIQUID, N.O.S.
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Directive 2012/18/EU applies.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Speedy 500?
The signal word is danger.
What is the physical form of Speedy 500?
Speedy 500 is a fluid with colourless color. It has solvent-like odor.
What is Speedy 500 used for?
Cleaner solvent
What are the hazard statements for Speedy 500?
This substance has 7 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of Speedy 500?
The melting point is Not determined and the boiling point is 140 °C.