NextSDS Logo
Safety Data Sheet EN

Dashboard Wipes

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Dashboard Wipes
Product Code
83223

Regulatory Identifiers

CAS Number
N/A

Identified Uses

FOR PROFESSIONAL AND INDUSTRIAL USE ONLY, Surface cleanser

Manufacturers & Suppliers

K

KENT (United Kingdom) Ltd

manufacturer

Forsyth House, Pitreavie Drive, Pitreavie Business Park, Dunfermline, Fife, KY11 8US

0800 136925

Emergency Contacts

KENT (United Kingdom) Ltd

+44 01383 723344

During normal office hours - Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Precautionary Statements

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of the substances listed below with harmless additions.

Chemical Name CAS Number Concentration Hazardous
Propan-2-ol EC: 200-661-7 67-63-0 5 - 10% Yes
preservation agents --- 15 - 30% No
ISOPROPYL ALCOHOL --- 5 - 15% No
Perfumes --- 5% No
Cationic surfactants --- 5% No
METHYLISOTHIAZOLINONE --- 5% No
BENZISOTHIAZOLINONE --- 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of symptoms.

Skin contact

Instantly wash with water and soap and rinse thoroughly. Generally the product is not skin irritating.

Eye contact

Rinse opened eye for several minutes under running water. Then consult doctor.

Ingestion

In case of persistent symptoms consult doctor.

Medical Treatment

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire fighting measures that suit the environment.

Specific hazards

No further relevant information available.

Firefighter Protection

No special measures required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Not required.

Environmental

Do not allow to enter drainage system, surface or ground water. Dilute with much water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special measures required.

Storage

Store in cool, dry conditions in well sealed containers.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: Value for the permeation: Level 6 > 480 minutes. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Safety glasses (EN 166)

Respiratory

Not necessary if room is well-ventilated.

Skin/Body

Protective work clothing (EN-13034/6)

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
Not determined
Voc Content
---
Decomposition Temperature
Not determined.
Vapor Density
---
Properties Status
---
Solubility In Fat
---
Physical State
Fluid
Relative Evaporation Rate
---
Odor
Mild
Solubility
---
Partition Coefficient
Not determined.
Softening Point
---
Dynamic Viscosity
Not determined.
Bulk Density
---
Flash Point
Not applicable
Relative Density
Not determined.
Explosive Limits
---
Boiling Point
Not determined
Auto Ignition Temperature
425 °C
Cloud Point
---
Solidification Point
---
Crystallisation Point
---
Form
Fluid
Solubility In Water
Fully miscible
Ph
Not determined.
Lower Explosive Limit
Not determined.
Evaporation Rate
Not determined.
Kinematic Viscosity
Not determined.
Molecular Weight
---
Vapor Pressure
23 hPa
Density
Not determined
Appearance
---
Melting Point
Not determined
Colour Intensity
---
Upper Explosive Limit
Not determined.
Colour
Colourless
Physical State Data
liquid
Odor Threshold
Not determined.
State Under Standard Conditions
---
Flammability
Not applicable.
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Void
Shipping Name
Void
Transport Class
Void
Packing Group
Void
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Dashboard Wipes?

The signal word is no signal word.

What is the physical form of Dashboard Wipes?

Dashboard Wipes is a fluid with colourless color. It has mild odor.

What is Dashboard Wipes used for?

FOR PROFESSIONAL AND INDUSTRIAL USE ONLY, Surface cleanser

What is the melting point of Dashboard Wipes?

The melting point is Not determined and the boiling point is Not determined.