AUGEO® CLEAN MULTI

Move to fresh air. Keep at rest. Consult a physician if necessary.

Take off contaminated clothing and shoes immediately. Wash off immediately with soap and plenty of water. Use a mild soap if available. If skin irritation occurs, seek medical advice/attention.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.

Do not induce vomiting without medical advice. Rinse mouth with water. Do not give anything to drink. Keep at rest. Consult a physician if necessary.

Water spray, Multi-purpose powders, Carbon dioxide (CO2), Alcohol Resistant Aqueous Film Forming Foam (AR-AFFF)

Do not use a solid water stream as it may scatter and spread fire.

Combustible liquid. The pressure in sealed containers can increase under the influence of heat. Hazardous decomposition products formed under fire conditions. High concentrations of toxic or harmful products may remain in the residual liquid once the fire has been extinguished.

Stay upwind. Fight fire with normal precautions from a reasonable distance. Do not use a solid water stream as it may scatter and spread fire. Cool down the containers/equipment exposed to heat with a water spray. Ensure that there is NO direct contact between the water and the product. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Avoid inhalation, ingestion and contact with skin and eyes. Stop leak if safe to do so.

Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems. Prevent further leakage or spillage if safe to do so. The product should not be allowed to enter drains, water courses or the soil.

Soak up with inert absorbent material. Shovel or sweep up. Wash non-recoverable remainder with large amounts of water. Clean contaminated surface thoroughly. Recover the cleaning water for subsequent disposal.

Materials: sand, silica gel, acid binder, universal binder

Pregnant workers should not be exposed to this product. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment. Wear suitable protective clothing. Avoid inhalation, ingestion and contact with skin and eyes. Avoid splashes. Avoid formation of aerosol.

Keep locked up or in an area accessible only to qualified or authorised persons. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from open flames, hot surfaces and sources of ignition. Keep away from incompatible materials.

Handle in accordance with good industrial hygiene and safety practice. Use clean, well-maintained personal protection equipment. Regular cleaning of equipment, work area and clothing. When using do not eat, drink or smoke. Smoking, eating and drinking should be prohibited in the application area. Wash hands before breaks and immediately after handling the product. Contaminated work clothing should not be allowed out of the workplace.

Keep away from open flames, hot surfaces and sources of ignition.

Effective exhaust ventilation system; Ensure adequate ventilation; Extract at emission point; Ensure that extracted air cannot be returned to the workplace through the ventilation system; Avoid splashes; Avoid formation of aerosol.

Where there is a risk of contact with hands, use appropriate gloves; Gloves must be inspected prior to use; Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time; Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough; The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Tightly fitting safety goggles; Face-shield

This should be achieved by a good general extraction and -if practically feasible- by the use of a local exhaust ventilation; Use a respirator with an approved filter if a risk assessment indicates this is necessary.

Full protective suit; Footwear protecting against chemicals; Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Dam up; Prevent product from entering sewage system; Try to prevent the material from entering drains or water courses; Local authorities should be advised if significant spillages cannot be contained; Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems; Prevent further leakage or spillage if safe to do so; Contain the spilled material by bunding; The product should not be allowed to enter drains, water courses or the soil.

Stable under recommended storage conditions.

Stable at normal ambient temperature and pressure.

No dangerous reaction known under conditions of normal use.

Keep away from open flames, hot surfaces and sources of ignition. Avoid high temperatures. Avoid excessive heat for prolonged periods of time.

Strong oxidizing agents, Strong acids, On contact with acid releases: Acetone

On combustion or on thermal decomposition (pyrolysis) releases: Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).