AUGEO CLEAN MULTI

Move to fresh air. Keep at rest. Consult a physician if necessary.

Symptoms: Inhalation of product may aggravate existing chronic respiratory problems such as asthma, emphysema or bronchitis

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If skin irritation occurs, seek medical advice/attention.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a physician

Do NOT induce vomiting. Rinse mouth with water. Do not give anything to drink. Consult a physician if necessary.

Foam, Dry powder, Water mist, Carbon dioxide (CO2). Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

High volume water jet

Combustible liquid. Heating increases the inner pressure of the bottle, risk of explosion.

Cool containers/tanks with water spray.

Stop the leak. Turn leaking containers leak-side up to prevent the escape of liquid. Remove all incompatible materials as quickly as possible. Mark the contaminated area with signs and prevent access to unauthorized personnel.

Dam up. Prevent product from entering sewage system. Try to prevent the material from entering drains or water courses.

Collect spillage. Pick up and transfer to properly labelled containers. Keep in suitable, closed containers for disposal. Pick up contaminated soil. Clean contaminated floors and objects thoroughly while observing environmental regulations.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)

Provide adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment. Avoid inhalation, ingestion and contact with skin and eyes.

Keep in a dry, cool and well-ventilated place. Protect from frost, heat and sunlight.

Ensure that eyewash stations and safety showers are close to the workstation location. Use clean, well-maintained personal protection equipment. Wash hands before breaks and at the end of workday. When using do not eat, drink or smoke.

Keep away from heat and sources of ignition.

Where there is a risk of contact with hands, use appropriate gloves. Gloves must be inspected prior to use. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.

Tightly fitting safety goggles

Use a respirator with an approved filter if a risk assessment indicates this is necessary.

Choose body protection according to the amount and concentration of the dangerous substance at the work place. Remove and wash contaminated clothing.

Dam up. Prevent product from entering sewage system. Try to prevent the material from entering drains or water courses. Local authorities should be advised if significant spillages cannot be contained.

Stable at room temperature. Stable under normal conditions.

Not classified as a reactivity hazard.

Vapours may form explosive mixture with air.

Heat, flames and sparks.

Strong oxidizing agents, Strong acids

On combustion or on thermal decomposition (pyrolysis) releases: Carbon oxides (CO + CO2), Acetic acid, Ethanol

Dispose of contents/ container to an approved waste disposal plant. Send to a licensed waste management company.

Do not dispose of with domestic refuse.