AUGEO® CRYSTAL

Quickly move the person away from the contaminated area. Make the affected person rest. Obtain medical attention. Show this sheet to the doctor. Be prepared to provide first aid or medical support if necessary.

Wash off immediately with plenty of water for at least 15 minutes. Use appropriate protective equipment when treating a contaminated person. In case of inflammation (redness, irritation, ...) obtain medical attention. Show this sheet to the doctor. Be prepared to provide first aid or medical support if necessary.

Symptoms: Redness, Swelling of tissue, Causes skin burns.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Show this sheet to the doctor. Always obtain medical advice, even if there are no symptoms. Be prepared to provide first aid or medical support if necessary.

Symptoms: Lachrymation, Conjunctivitis, Causes eye burns.

Do NOT induce vomiting. Obtain medical attention. Show this sheet to the doctor. Do not give anything to drink. Be prepared to provide first aid or medical support if necessary.

Water spray, Multi-purpose powders, Carbon dioxide (CO2), Alcohol Resistant Aqueous Film Forming Foam (AR-AFFF). Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide for large fires.

Do not use a solid water stream as it may scatter and spread fire. High volume water jet.

Combustible liquid. The pressure in sealed containers can increase under the influence of heat. Hazardous decomposition products formed under fire conditions. High concentrations of toxic or harmful products may remain in the residual liquid once the fire has been extinguished. Under fire conditions, the product will burn and toxic gases are released on combustion.

Stay upwind. Fight fire with normal precautions from a reasonable distance. Do not use a solid water stream as it may scatter and spread fire. Cool down the containers/equipment exposed to heat with a water spray. Ensure that there is NO direct contact between the water and the product. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Avoid inhalation, ingestion and contact with skin and eyes. Eliminate all ignition sources if safe to do so. Stop leak if safe to do so.

Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems. Prevent further leakage or spillage if safe to do so. The product should not be allowed to enter drains, water courses or the soil.

Shovel or sweep up. Keep in suitable, closed containers for disposal. Never return spills in original containers for re-use. Wash non-recoverable remainder with large amounts of water. Clean contaminated surface thoroughly. Recover the cleaning water for subsequent disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder), water

Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment. Wear suitable protective clothing. Avoid inhalation, ingestion and contact with skin and eyes. Avoid splashes. Avoid formation of aerosol. For personal protection see section 8. Containers must be bonded and grounded when pouring or transferring material. This material contains a flammable or combustible liquid and vapor.

Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems. Keep locked up or in an area accessible only to qualified or authorised persons. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from open flames, hot surfaces and sources of ignition. Keep away from incompatible materials to be indicated by the manufacturer. Observe the general rules of industrial fire protection. Areas containing this material should have fire safe practices and electrical equipment in accordance with applicable regulations and/or guidelines. Standards are primarily based on the material's flashpoint, but may also take into account properties such as miscibility with water or toxicity. All local and national regulations should be followed. In the Americas, National Fire Protection Association (NFPA) 30: Flammable and Combustible Liquids Code, is a widely used standard. NFPA 30 establishes storage conditions for the following classes of materials: Class I Flammable Liquids, Flashpoint <37.8 °C. Class II Combustible Liquids, 37.8 °C < Flashpoint <60 °C. Class IIIa Combustible Liquids, 60 °C < Flashpoint < 93 °C. Class IIIb Combustible Liquids, Flashpoint > 93 °C. Keep away from sources of ignition - No smoking.

Handle in accordance with good industrial hygiene and safety practice. Use clean, well-maintained personal protection equipment. Regular cleaning of equipment, work area and clothing. When using do not eat, drink or smoke. Smoking, eating and drinking should be prohibited in the application area. Wash hands before breaks and immediately after handling the product. Contaminated work clothing should not be allowed out of the workplace. The user is responsible for monitoring the working environment in accordance with local laws and regulations.

This material contains a flammable or combustible liquid and vapor. Keep away from open flames, hot surfaces and sources of ignition. Observe the general rules of industrial fire protection. Areas containing this material should have fire safe practices and electrical equipment in accordance with applicable regulations and/or guidelines. Standards are primarily based on the material's flashpoint, but may also take into account properties such as miscibility with water or toxicity. All local and national regulations should be followed. In the Americas, National Fire Protection Association (NFPA) 30: Flammable and Combustible Liquids Code, is a widely used standard. NFPA 30 establishes storage conditions for the following classes of materials: Class I Flammable Liquids, Flashpoint <37.8 °C. Class II Combustible Liquids, 37.8 °C < Flashpoint <60 °C. Class IIIa Combustible Liquids, 60 °C < Flashpoint < 93 °C. Class IIIb Combustible Liquids, Flashpoint > 93 °C. Keep away from sources of ignition - No smoking.

Effective exhaust ventilation system. Ensure adequate ventilation. Extract at emission point. Ensure that extracted air cannot be returned to the workplace through the ventilation system. Avoid splashes. Avoid formation of aerosol.

Where there is a risk of contact with hands, use appropriate gloves. Gloves must be inspected prior to use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Tightly fitting safety goggles. Face-shield.

This should be achieved by a good general extraction and -if practically feasible- by the use of a local exhaust ventilation. Use a respirator with an approved filter if a risk assessment indicates this is necessary. Keep in a well-ventilated place.

Full protective suit. Footwear protecting against chemicals. Choose body protection according to the amount and concentration of the dangerous substance at the work place. Impervious clothing. Change working clothes after each workshift. Contaminated work clothing should not be allowed out of the workplace.

Take all necessary measures to avoid accidental discharge of products into drains and waterways due to the rupture of containers or transfer systems. Prevent further leakage or spillage if safe to do so. Contain the spilled material by bunding. The product should not be allowed to enter drains, water courses or the soil. Dispose of rinse water in accordance with local and national regulations.

Stable under recommended storage conditions.

Stable at normal ambient temperature and pressure.

No dangerous reaction known under conditions of normal use.

Keep away from open flames, hot surfaces and sources of ignition. Avoid high temperatures. Avoid excessive heat for prolonged periods of time.

Strong oxidizing agents Strong acids On contact with acid releases: Acetone

On combustion or on thermal decomposition (pyrolysis) releases: Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).