NextSDS Logo
Safety Data Sheet EN

GRF KOLMAT JR 450G*12 NLFR

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GRF KOLMAT JR 450G*12 NLFR

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Sealant

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

B

Bison International

manufacturer

Dr.A.F.Philipsstraat 9, NL-4462 EW Goes, PO Box 160, NL-4460 AD Goes

Emergency Contacts

Emergency Contact

+31 88 3235700

mo-fr 08:00h-17:00h (CET)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear eye protection / face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with national regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Sealant

Chemical Name CAS Number Concentration Hazardous
pumice EC: 603-719-3 1332-09-8 25 - 50% Yes
Naphthenic acids, zinc salts EC: 234-409-2 12001-85-3 0.25 - 1% Yes
Cement, portland, chemicals EC: 266-043-4 65997-15-1 0.1 - 1% Yes
Flue dust, portland cement EC: 270-659-9 68475-76-3 0.1 - 1% Yes
zinc oxide EC: 215-222-5 1314-13-2 0.25 - 1% Yes
N-1-naphthylaniline EC: 201-983-0 90-30-2 0.1 - 0.25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints. No special measures required.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

If symptoms persist consult doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire extinguishing methods suitable to surrounding conditions.

Specific hazards

No further relevant information available.

Firefighter Protection

No special measures required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special precautions are necessary if used correctly.

Storage

Keep container tightly sealed.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. Recommended thickness of the material: > 0,12 mm. Penetration time of glove material: For the mixture of chemicals mentioned below the penetration time has to be at least 10 minutes (Permeation according to EN 374 Part 3: Level 1).

Eyes

Tightly sealed goggles

Respiratory

Not required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Colour
According to product specification
Flash Point
Not applicable.
Vapor Pressure
Not applicable.
Kinematic Viscosity
Not applicable.
Evaporation Rate
Not applicable.
Physical State Data
solid
Relative Density
Not determined.
Decomposition Temperature
Not determined.
Solubility In Water
Insoluble.
Form
Pasty
Appearance
---
Vapor Density
Not applicable.
Odor Threshold
Not determined.
Ph
Not applicable.
Molecular Weight
---
Properties Status
---
Density
1.768 g/cm³
Explosive Limits
---
Boiling Point
Undetermined.
Metal Corrosion
---
Physical State
Solid
Lower Explosive Limit
---
Partition Coefficient
Not determined.
State Under Standard Conditions
---
Dynamic Viscosity
Not applicable.
Auto Ignition Temperature
Product is not selfigniting.
Relative Evaporation Rate
---
Upper Explosive Limit
---
Flammability
Not determined.
Crystallisation Point
---
Solubility In Fat
---
Bulk Density
---
Colour Intensity
---
Solubility
---
Melting Point
Undetermined.
Cloud Point
---
Voc Content
---
Freezing Point
Undetermined.
Odor
Recognisable
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

Danger of forming toxic pyrolysis products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GRF KOLMAT JR 450G*12 NLFR?

The signal word is warning.

What is the physical form of GRF KOLMAT JR 450G*12 NLFR?

GRF KOLMAT JR 450G*12 NLFR is a solid with according to product specification color. It has recognisable odor.

What is GRF KOLMAT JR 450G*12 NLFR used for?

Sealant

What are the hazard statements for GRF KOLMAT JR 450G*12 NLFR?

This substance has 3 hazard statements:

  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of GRF KOLMAT JR 450G*12 NLFR?

The melting point is Undetermined. and the boiling point is Undetermined..