Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Flameretarder AD-15
- Product Form
- Mixture
- Product Code
- DH1062
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use, Professional use, Textile industries, Flame retardant
Uses advised against
No additional information available
Manufacturers & Suppliers
Devan Chemicals N.V.
manufacturer
Ninoofsesteenweg 539, 9600 Ronse - België
+32 55 23 01 10
http://www.devan.net
Emergency Contacts
Centre Anti-Poisons/Antigifcentrum c/o Hôpital Central de la Base - Reine Astrid
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| antimony trioxide EC: 215-175-0 | 1309-64-4 | 30% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow breathing of fresh air. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
On land, sweep or shovel into suitable containers.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid dust formation. Use personal protective equipment as required. Wear personal protective clothing (see chapter 8).
Store in a dry, cool and well-ventilated place. Keep container closed when not in use.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves tested to EN374
Chemical goggles or safety glasses
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended
When skin contact is possible, protective clothing including gloves, apron, sleeves, boots, head and face protection must be worn
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Not established.
No additional information available
Not established.
Direct sunlight. Extremely high or low temperatures.
Strong acids. Strong bases. Oxidizing agent. Reducing agents.
fume. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Flameretarder AD-15?
The signal word is warning.
What is the physical form of Flameretarder AD-15?
Flameretarder AD-15 is a solid appearing as powder. with white. color.
What is the solubility of Flameretarder AD-15?
Water: 2.76 mg/l (antimony trioxide)
What is Flameretarder AD-15 used for?
Industrial use, Professional use, Textile industries, Flame retardant
What are the hazard statements for Flameretarder AD-15?
This substance has 1 hazard statement:
- H351: Suspected of causing cancer
What is the melting point of Flameretarder AD-15?
The melting point is > 300 °C and the boiling point is No data available.