FLAMTARD H

In case of symptoms, move the person affected into fresh air.

In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of changes to the skin (stinging, redness, rashes, blisters,...), seek medical advice with this Safety Data Sheet

Symptoms: stinging, redness, rashes, blisters

Rinse with water until the product has been eliminated. In case of problems, consult a doctor showing the SDS for the product.

In case of consumption in large quantities, it is recommended to seek medical assistance.

Product is non-flammable, with a low risk of fire due to the flammability characteristics of the product in normal conditions of storage, handling and use. In the case of the existence of sustained combustion as a result of improper handling, storage or use any type of extinguishing agent can be used (ABC Powder, water,...)

Non-applicable

Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of storage, handling and use.

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures.

Isolate leaks provided that there is no additional risk for the people performing this task. For emergency responders: Wear protective equipment. Keep unprotected persons away.

This product is not classified as hazardous to the environment. Keep product away from drains, surface and ground water.

Sweep up and shovel product or collect by other means and place in container for reuse (preferred) or disposal

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods.

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

It is recommended to transfer at a slow speed to avoid the creation of electrostatic charges that could affect flammable products.

Protective gloves against minor risks. Replace gloves in case of any sign of damage. For prolonged periods of exposure to the product for professional users/industrials, we recommend using CE III gloves in line with standards EN ISO 21420:2020 and EN ISO 374-1:2016+A1:2018

Panoramic glasses against splash/projections. EN 166:2002, EN ISO 4007:2018. Clean daily and disinfect periodically according to the manufacturer's instructions. Use if there is a risk of splashing.

Filter mask for particles. EN 149:2001+A1:2009. Replace when an increase in resistance to breathing is observed.

Work clothing: Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 6529:2013, EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994. Anti-slip work shoes: EN ISO 20347:2012. Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 20345:2012 y EN 13832-1:2007

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container.

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7 from Safety Data Sheet.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Shock and friction: Not applicable, Contact with air: Not applicable, Increase in temperature: Not applicable, Sunlight: Not applicable, Humidity: Not applicable.

Acids: Avoid strong acids, Water: Not applicable, Oxidising materials: Not applicable, Combustible materials: Not applicable, Others: Avoid alkalis or strong bases.

See sub section 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions, complex mixtures of chemical substances can be released: Mixture based on inorganic substances.