Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LA 1660/22 (EXP080205)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coatings and paints, fillers, putties, thinners
Manufacturers & Suppliers
ROWA Lack GmbH
manufacturer
Siemensstraße 1-5, 25421 Pinneberg
+49 4101 706-05
Emergency Contacts
GIZ Göttingen
+49 (0) 551 19240
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PROPAN-2-OL EC: 200-661-7 | 67-63-0 | 25 - 30% | Yes |
| 2-METHOXY-1-METHYLETHYL ACETATE EC: 203-603-9 | 108-65-6 | 20 - 25% | Yes |
| BUTANONE EC: 201-159-0 | 78-93-3 | 10 - 15% | Yes |
| 1-METHOXY-2-PROPANOL EC: 203-539-1 | 107-98-2 | 5 - 10% | Yes |
| BENZOTRIAZOLEDERIVATE | --- | 0.1 - 0.5% | Yes |
| Reaction mass of Pentamethyl-Piperidyl Sebacat | --- | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In case of respiratory tract irritation, consult a physician. In case of inhaling spray mist, consult a physician.
Symptoms: Respiratory tract irritation
After contact with skin, wash immediately with plenty of water and soap. Rub greasy ointment into the skin. In case of skin reactions, consult a physician. Do not wash with: Solvents/Thinner
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention.
Immediate Medical Attention
In case of accident or unwellness, seek medical advice immediately. Obtain immediate medical attention if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, Water mist, Extinguishing powder
Full water jet
In case of fire may be liberated: Nitrogen oxides (NOx), Carbon monoxide, Carbon dioxide (CO2)
Co-ordinate fire-fighting measures to the fire surroundings. Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Suppress gases/vapours/mists with water spray jet. Do not allow to enter into surface water or drains. Cover drains. Do not allow to enter into soil/subsoil. Make sure spills can be contained, e.g. in sump pallets or kerbed areas.
Take up mechanically.
Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is as low as possible: Inhalation of vapours or spray/mists. It is recommended to design all work processes always so that the following is excluded: Skin contact Eye contact. Only use the material in places where open light, fire and other flammable sources can be kept away. Wear personal protection equipment (refer to section 8).
Keep/Store only in original container. Ensure adequate ventilation of the storage area. Floors should be impervious, resistant to liquids and easy to clean. Shafts and sewers must be protected from entry of the product. Keep container tightly closed in a cool, well-ventilated place. Heating causes rise in pressure with risk of bursting.
Always close containers tightly after the removal of product.
Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Provide earthing of containers, equipment, pumps and ventilation facilities. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable material : Butyl caoutchouc (butyl rubber) Breakthrough time (maximum wearing time) : 240 Min. Thickness of the glove material : 0,7 + / - 0,1mm Recommended glove articles : z.B. KCL Butlojekt 0898 Manufacturer KCL GmbH, Industriepark Rhön, Am Kreuzacker, Eichenzell, Deutschland, Tel. +496659 87-300 Or comparable articles from other companies. Additional hand protection measures : Check leak tightness/impermeability prior to use. Do not wear gloves near rotary machines and tools. Wear cotton undermitten if possible. Take recovery periods for skin regeneration. Remark : For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Eye glasses with side protection goggles. Additional eye protection measures: In case of increased risk, additionally Face protection umbrella
Respiratory protection necessary at: exceeding exposure limit values insufficient ventilation insufficient exhaust. Suitable respiratory protection apparatus: Filtering device with filter or ventilator filtering device of type: A. Remark: The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used.
Suitable protective clothing : Overall. Remark : Only wear fitting, comfortable and clean protective clothing. Barrier creams are not substitutes for body protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
No hazardous reaction when handled and stored according to provisions.
Reacts violently with peroxides.
In case of warming: Danger of bursting container.
No information available.
Nitrogen oxides (NOx) Carbon monoxide. Carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LA 1660/22 (EXP080205)?
The signal word is danger.
What is the physical form of LA 1660/22 (EXP080205)?
LA 1660/22 (EXP080205) is a liquid appearing as cloudy light yellow with cloudy light yellow color. It has like: solvents/thinner odor.
What is LA 1660/22 (EXP080205) used for?
Coatings and paints, fillers, putties, thinners
What are the hazard statements for LA 1660/22 (EXP080205)?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.