Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SONGSORB® CS 292
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119491304-40-XXXX
Identified Uses
Coating
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Songwon Industrial Co., Ltd.
manufacturer
83, Jangsaengpo-ro, Nam-gu, Ulsan, Korea
+82 (0)52-273-9841
Songwon International AG
manufacturer
Walzmühlestrasse 48, CH-8500 Frauenfeld
+41 (0)52 635 00 00
Emergency Contacts
BIG: BrandweerInformatiecentrum Gevaarlijke Stoffen
+32-14-584545
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Reaction mass of Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse out mouth and then drink plenty of water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂ powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosols.
Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Only use chemical-protective gloves with CE-labelling of category III. EN 374. Rubber gloves. PVC gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Gauze goggles. EN 166.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous reactions known.
Keep away from heat and direct sunlight.
Strong oxidizing agents. Reacts with strong acids and alkali.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Reaction mass of Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SONGSORB® CS 292?
The signal word is warning.
What is the physical form of SONGSORB® CS 292?
SONGSORB® CS 292 is a liquid appearing as liquid, viscous, light yellow with light yellow color. It has ester-like odor.
What is SONGSORB® CS 292 used for?
Coating
What are the hazard statements for SONGSORB® CS 292?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H361f: Suspected of damaging fertility.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of SONGSORB® CS 292?
The melting point is -57.8 °C and the boiling point is > 300 °C.