Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Anex WF 5095 PL
- Product Code
- GBF-086
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Aromatic Polyurethane Solution
Manufacturers & Suppliers
INTERPLASTKIMYA SANAYI ve TIC. A.Ş.
manufacturer
Değirmenköy Fevzipaşa mah. Erdoğan sok. No:5 34586 SİLİVRİ/İSTANBUL / TÜRKİYE
+90 212 771 25 95 pbx
Emergency Contacts
INTERPLASTKIMYA SANAYI ve TIC. A.Ş.
+90 212 771 25 95
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N,Ndimethylformamide | 68-12-2 | 50 - 80% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Whilst protecting yourself remove the casualty from the hazardous area and take him to fresh air and keep at rest. If the person is unconscious, place him/her in side position suitable for transportation. If breathing is interrupted, give artificial respiration. Appropriate precautions must be taken for the person who helps.
Whilst protecting yourself, relocate the casualty away from the source of danger. Remove contaminated clothing. Immediately clean the affected skin areas under running water. Arrange medical treatment.
Remove lense sif present. Wash, eyelids, open thoroughly and immediately with plenty of water for at least 20 minutes. Consult a doctor immediately.
Gargle with warm water and drink as much water as possible. Consult a doctor immediately. Do not induce vomiting if it is not clearly allowed by the doctor.
Immediate Medical Attention
Consult a doctor immediately.
Medical Treatment
Treat according to symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Forem, CO2, dry chemicals.
Never use a direct water jet on burning material
Possible increase in pressure in closed cups due to heat. Heating may cause explosion. The fire produces intense black smoke. Thermal decomposition may lead to the development of irritating vapors or gases and / or fire. Exposure to decomposition products may cause a health hazard.
If exposed to fire keep the vessel cool by spraying water. Use explosion-proof electrical equipment. Use spark-free hand tools.
Firefighter Protection
The pressure demand type self-contained breathing apparatus must be provided to the firemen on the premises or in the closed area where this product is stored. Wear self-contained breathing apparatus and protective clothing for chemical substances.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Empty the area upon accidental release of this material.
Avoid media discharge.
Collect in closed containers to dispose of
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Comply with health and safety precautions as prescribed by work practices. Keep the vessel tightly closed. Keep away from heat, sparks and sources of open flame. Always keep in containers made from the same material as the original material. Avoid eye and skin contact. Avoid breathing spray particles from the application.
Observe the precautions in the label. Block unauthorized access. The opened containers must be carefully closed again and held upright to prevent leakage. Only use containers, pipes, gaskets, etc. made of materials suitable for use with organic solvents. Store in a well-ventilated place. Do not expose yourself to direct sunlight.
Do not eat, drink or smoke in the application area.
Keep away from heat, sparks and sources of open flame. Keep away from heat sources, prevent static buildup, ground. Do not smoke. Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use suitable protective gloves.
Wear chemical safety goggles.
Install a gas mask when the concentration in the air exceeds the standard level.
Wear suitable protective clothing to prevent skin exposure.
Review the Community Environmental Protection Legislation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Polymerization will not come into play.
Avoid electrostatic charge buildup. Avoid any ignition source.
None.
Carbon monoxide, carbon dioxide, nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- UN 1993 FLAMMABLE LIQUID.B.B.B
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Anex WF 5095 PL?
The signal word is danger.
What is the physical form of Anex WF 5095 PL?
Anex WF 5095 PL is a viscous liquid. appearing as viscous liquid. with clear-colorless color. It has organic solvent. odor.
What is Anex WF 5095 PL used for?
Aromatic Polyurethane Solution
What are the hazard statements for Anex WF 5095 PL?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour.
- H312: Harmful in contact with skin.
- H319: Causes serious eye damage.
- H332: Harmful if inhaled.
- H360D: May damage the unborn child.