Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- uni POSCA Basic colors (PC-1M/3M/5M/7M/8K/17K,PC-1MR, PCF-350)
- Product Code
- 100657E
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
MITSUBISHI PENCIL CO., LTD.
manufacturer
5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPAN
03-3458-6281
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Ink
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Water | 7732-18-5 | 50 - 80% | No |
| Titanium dioxide | 13463-67-7 | 30% | No |
| 1,2-Ethanediol | 107-21-1 | 10% | No |
| 1,2-Propanediol | 57-55-6 | 10% | No |
| 2-Propanol | 67-63-0 | 10% | No |
| Carbon black | 1333-86-4 | 10% | No |
| Ethanol | 64-17-5 | 10% | No |
| 1-Propanol | 71-23-8 | 1% | No |
| 2-Aminoethanol | 141-43-5 | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Due to its low vapor pressure inhalation is unlikely at room temperature. If not feeling well, move to an area of fresh air and rest. Consult medical advice depending on the symptoms.
Wash skin. Consult medical advice depending on the symptoms. Thoroughly clean and dry contaminated clothing and shoes before reuse.
Flush eyes with plenty of water for at least 15 minutes. Take off the contact lens if possible. Consult medical advice depending on the symptoms.
Rinse mouth, give plenty of water to dilute. No specific intervention is indicated as compound is not likely to be hazardous by ingestion. Consult medical advice depending on the symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Regular dry chemical, carbon dioxide, water, regular foam
No further relevant information available.
Stay upwind and keep out of low areas and avoid inhalation of material or combustion by-products.
Firefighter Protection
Wear suitable protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Rope off the area to contain the leak and prohibit entrance except for authorized persons. Do not work in the leeward.
Do not allow leaked material to pollute rivers, lakes, etc.
Collect leaked material in empty container. Wipe off by dry cloth and wash with water.
Related Products
Similar products with comparable safety profiles
MOTIP PRIMER (Black / Grey / Red / White)
---
Rubber Base Plus Black 10850/12630, PANTONE Black
---
Primacolor all colours
---
H Paintstik® Black
---
PU05356_S25XXX_PURCHASING PIGMENT
CAS: 102184-95-2
COLORMARK Ecomarker Chalk various colours 500ml/750ml
---
COLORMARK LINEMARKER ORANGE 500 ML
---
COLORMARK LINEMARKER BLUE 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not lick or swallow the ink. Avoid contact with skin and eyes. Recap after use (if there is a cap), and keep out of the reach of infants.
Keep away from oxidizing materials, ignition sources, high temperature and direct sunlight. Recommended temperature : 0–40°C
Keep away from ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not required.
Not required.
Not required.
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable in normal temperature and pressure.
No data available.
No information available.
Avoid heat, flames, sparks and other sources of ignition. Avoid direct sunlight and high temperature.
No information available.
No information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Check the container for any leakage. Load a cargo without a dropping or incurring damage, and take causion against collapse of container.
Check the container for any leakage. Load a cargo without a dropping or incurring damage, and take causion against collapse of container.
Check the container for any leakage. Load a cargo without a dropping or incurring damage, and take causion against collapse of container.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for uni POSCA Basic colors (PC-1M/3M/5M/7M/8K/17K,PC-1MR, PCF-350)?
The signal word is danger.
What is the physical form of uni POSCA Basic colors (PC-1M/3M/5M/7M/8K/17K,PC-1MR, PCF-350)?
uni POSCA Basic colors (PC-1M/3M/5M/7M/8K/17K,PC-1MR, PCF-350) is a liquid with various (refer to section 16) color. It has no information available. odor.
What are the hazard statements for uni POSCA Basic colors (PC-1M/3M/5M/7M/8K/17K,PC-1MR, PCF-350)?
This substance has 5 hazard statements:
- H316: Causes mild skin irritation
- H350: May cause cancer
- H360: May damage fertility or the unborn child
- H370: Causes damage to organs
- H372: Causes damage to organs through prolonged or repeated exposure
What is the melting point of uni POSCA Basic colors (PC-1M/3M/5M/7M/8K/17K,PC-1MR, PCF-350)?
The melting point is No information available. and the boiling point is 100.0°C.