NextSDS Logo
Safety Data Sheet EN

KLEENSPRAY S

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
KLEENSPRAY S

Regulatory Identifiers

CAS Number
N/A
REACH No.
Not applicable (mixture)

Identified Uses

Detergent according to Regulation (EC) No 648/2004

Uses advised against

No uses advised against known

Manufacturers & Suppliers

N

Novatio

national supplier

Industrielaan 5B, B-2250 Olen

+32 14 25 76 40

N

Novatech International N.V.

manufacturer

Industrielaan 5B, B-2250 Olen

+32 14 85 97 37

Emergency Contacts

BIG

+32 14 58 45 45

24h/24h

EN, FR, DE, NL

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Asp. Tox. Cat. 1 H304
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 Wear protective gloves and eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics EC: 920-750-0 --- 70% Yes
propan-2-ol EC: 200-661-7 67-63-0 20% Yes
acetone EC: 200-662-2 67-64-1 20% Yes
n-hexane EC: 203-777-6 110-54-3 2% Yes
cyclohexane EC: 203-806-2 110-82-7 2% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.

Symptoms: Headache. Nausea. Dizziness. Narcosis. Disturbances of consciousness.

Skin contact

Wash immediately with lots of water. Soap may be used. Do not apply (chemical) neutralizing agents without medical advice. Take victim to a doctor if irritation persists.

Symptoms: Dry skin. Cracking of the skin.

Eye contact

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. Do not apply (chemical) neutralizing agents without medical advice. Take victim to an ophthalmologist if irritation persists.

Symptoms: Irritation of the eye tissue.

Ingestion

Rinse mouth with water. Do not induce vomiting. Do not apply (chemical) neutralizing agents without medical advice. Consult a doctor/medical service if you feel unwell.

Symptoms: Risk of aspiration pneumonia. Nausea. Gastrointestinal complaints.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Small fire: Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting class B foam extinguisher, Quick-acting CO2 extinguisher. Major fire: Class B foam (not alcohol-resistant).

Unsuitable media

Small fire: Water (quick-acting extinguisher, reel); risk of puddle expansion. Major fire: Water; risk of puddle expansion.

Specific hazards

Upon combustion: CO and CO2 are formed.

Instructions

If exposed to fire cool the closed containers by spraying with water. Do not move the load if exposed to heat. Take account of environmentally hazardous firefighting water. Use water moderately and if possible collect or contain it.

Firefighter Protection

Gloves. Face shield. Protective clothing. Heat/fire exposure: compressed air/oxygen apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop engines and no smoking. No naked flames or sparks. Spark- and explosionproof appliances and lighting equipment.

Environmental

Contain released product. Dam up the liquid spill. Try to reduce evaporation.

Cleanup methods

Take up liquid spill into absorbent material. Scoop absorbed substance into closing containers. Carefully collect the spill/leftovers. Clean contaminated surfaces with an excess of water.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from naked flames/heat. Insufficient ventilation: keep naked flames/sparks away. Insufficient ventilation: take precautions against electrostatic charges. Insufficient ventilation: use spark-/explosionproof appliances and lighting system. Observe normal hygiene standards. Avoid prolonged and repeated contact with skin. Remove contaminated clothing immediately. Do not discharge the waste into the drain. Keep container tightly closed.

Storage

Storage temperature: < 50 °C. Store in a cool area. Protect against frost. Keep out of direct sunlight. Keep container in a well-ventilated place. Fireproof storeroom. Keep container tightly closed. Meet the legal requirements.

Hygiene

Observe normal hygiene standards. Avoid prolonged and repeated contact with skin. Remove contaminated clothing immediately.

Fire prevention

Keep away from naked flames/heat. Insufficient ventilation: keep naked flames/sparks away. Insufficient ventilation: take precautions against electrostatic charges. Insufficient ventilation: use spark-/explosionproof appliances and lighting system. Fireproof storeroom.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Keep away from naked flames/heat. Insufficient ventilation: keep naked flames/sparks away. Insufficient ventilation: take precautions against electrostatic charges. Insufficient ventilation: use spark-/explosionproof appliances and lighting system. Measure the concentration in the air regularly.

Hands

Protective gloves against chemicals (EN 374). Materials: butyl rubber, Measured breakthrough time: >480 minutes, Thickness: 0.7 mm, Protection index: Class 6.

Eyes

Protective goggles.

Respiratory

Full face mask with filter type A at conc. in air > exposure limit.

Skin/Body

Head/neck protection. Protective clothing.

Environmental

See headings 6.2, 6.3 and 13

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
No data available on colour
Colour Intensity
---
Form
Liquid
Odor
Characteristic odour
Odor Threshold
No data available
Ph
No data available
Melting Point
No data available
Boiling Point
57 °C - 140 °C
Flash Point
< -18 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
5.6 ; Butyl acetate
Vapor Pressure
43 hPa ; 20 °C
Vapor Density
---
Relative Density
0.73 ; 20 °C
Bulk Density
---
Density
730 kg/m³ ; 20 °C
Flammability
Highly flammable liquid and vapour.
Upper Explosive Limit
13 vol %
Lower Explosive Limit
0.9 vol %
Explosive Limits
---
Auto Ignition Temperature
250 °C
Decomposition Temperature
No data available
Solubility
Water ; insoluble
Partition Coefficient
Not applicable (mixture)
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
1 mPa.s ; 20 °C
Kinematic Viscosity
1 mm²/s ; 20 °C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

May be ignited by sparks. Gas/vapour spreads at floor level: ignition hazard.

Hazardous reactions

No data available.

Avoid

Keep away from naked flames/heat. Insufficient ventilation: keep naked flames/sparks away. Insufficient ventilation: take precautions against electrostatic charges. Insufficient ventilation: use spark-/explosionproof appliances and lighting system.

Incompatible

Oxidizing agents, reducing agents, (strong) acids, (strong) bases.

Decomposition

Upon combustion: CO and CO2 are formed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
Flammable liquid, n.o.s. (hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics)
Transport Class
3
Packing Group
II
IMDG

274

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for KLEENSPRAY S?

The signal word is danger.

What is the physical form of KLEENSPRAY S?

KLEENSPRAY S is a liquid with no data available on colour color. It has characteristic odour odor.

What is the solubility of KLEENSPRAY S?

Water ; insoluble

What is KLEENSPRAY S used for?

Detergent according to Regulation (EC) No 648/2004

What are the hazard statements for KLEENSPRAY S?

This substance has 5 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of KLEENSPRAY S?

The melting point is No data available and the boiling point is 57 °C - 140 °C.