Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hydroxide, 33wt% solution in water
- Product Code
- AC358620000; AC358620050; AC358620051; AC358620250; AC358625000
- Synonyms
- No information available
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Acros Organics
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
Emergency Contacts
Emergency Number US
001-201-796-7100
Emergency Number Europe
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. Remove from exposure, lie down. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Call a physician immediately.
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Call a physician immediately.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.
Do NOT induce vomiting. Clean mouth with water. Never give anything by mouth to an unconscious person. Call a physician immediately.
Symptoms: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically. Possible perforation of stomach or esophagus should be investigated.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, dry chemical, dry sand, alcohol-resistant foam.
No information available
Thermal decomposition can lead to release of irritating gases and vapors. The product causes burns of eyes, skin and mucous membranes.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thermal decomposition can lead to release of irritating gases and vapors.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak.
Should not be released into the environment.
Soak up with inert absorbent material.
Related Products
Similar products with comparable safety profiles
Sodium hydroxide 32%
CAS: 1310-73-2
sodium hydroxide solution
UFI: JRPV-H05N-400Y-13SU, VNPV-00G7-U00F-DS6S
Sodium Hydroxide Solution 29% to 51%
CAS: 1310-73-2
Sodium hydroxide solution 20%
UFI: APW7-HPGA-WPRX-EYF2
Sodium hydroxide
CAS: 1310-73-2
Sodium hydroxide
CAS: 1310-73-2
Sodium hydroxide
CAS: 1310-73-2
Sodium Hydroxide 50% Solution
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get in eyes, on skin, or on clothing. Wear personal protective equipment/face protection. Use only under a chemical fume hood. Do not breathe mist/vapors/spray. Do not ingest. If swallowed then seek immediate medical assistance.
Keep containers tightly closed in a dry, cool and well-ventilated place. Corrosives area. Keep only in the original container.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location.
Wear appropriate protective gloves
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Wear appropriate protective clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Reactive Hazard Yes
None under normal processing.
Exposure to air. Incompatible products.
Acids, Organic materials, Metals, Aluminium, copper, Zinc
Sodium oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1824
- Shipping Name
- SODIUM HYDROXIDE SOLUTION
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Sodium hydroxide, 33wt% solution in water known by?
Sodium hydroxide, 33wt% solution in water is also known as: No information available
What is the hazard signal word for Sodium hydroxide, 33wt% solution in water?
The signal word is danger.
What is the physical form of Sodium hydroxide, 33wt% solution in water?
Sodium hydroxide, 33wt% solution in water is a liquid appearing as colorless .
What is the solubility of Sodium hydroxide, 33wt% solution in water?
Soluble in water
What is Sodium hydroxide, 33wt% solution in water used for?
Laboratory chemicals.
What are the hazard statements for Sodium hydroxide, 33wt% solution in water?
This substance has 3 hazard statements:
- H290: May be corrosive to metals
- H314: Causes severe skin burns and eye damage
- H335: May cause respiratory irritation
What is the melting point of Sodium hydroxide, 33wt% solution in water?
The melting point is 8 °C / 46.4 °F and the boiling point is 120 °C / 248 °F.