Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Klüberoil 4 UH1-220 N
- Product Code
- 029042
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant.
Uses advised against
Consumer use
Manufacturers & Suppliers
Klüber Lubrication NA LP
32 Industrial Drive, Londonderry, NH 03053
(603) 647-4104
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC (INTERNATIONAL)
(703) 527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product contains no substances which at their given concentration, are considered to be hazardous to health.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. If symptoms persist, call a physician.
Rinse with plenty of water. If skin irritation persists, call a physician.
Flush eye with water for 15 minutes. If symptoms persist, call a physician.
Do not induce vomiting. Consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2). Dry chemical. Dry sand. Water spray mist or foam.
Do not use a solid water stream as it may scatter and spread fire
Thermal decomposition can lead to release of irritating gases and vapors. Water may be used to cool closed containers.
Firefighter Protection
In the event of fire and/or explosion do not breathe fumes. In the event of fire, wear self-contained breathing apparatus. Standard procedure for chemical fires.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contaminated surfaces will be extremely slippery. Avoid contact with skin, eyes and clothing. Wear personal protective equipment.
Do not allow material to contaminate ground water system. Prevent product from entering drains.
Soak up with oil absorbent material. Pick up and transfer to properly labelled containers. Clean contaminated surface thoroughly.
Materials: oil absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapors or spray mist. Avoid contact with skin, eyes and clothing. Spilling onto the container’s outside will make container slippery. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Keep container tightly closed in a dry and well-ventilated place. Keep cool. Keep in properly labelled containers. Keep away from heat and sources of ignition
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Keep away from heat and sources of ignition
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Impervious gloves
Safety glasses with side-shields. Avoid contact with eyes
No personal respiratory protective equipment normally required.
Usual safety precautions while handling the product will provide adequate protection against this potential effect
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Not applicable
None under normal processing. Hazardous polymerization does not occur.
Heat, flames and sparks
Strong oxidising agents
None under normal processing
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Klüberoil 4 UH1-220 N?
The signal word is no signal word.
What is the physical form of Klüberoil 4 UH1-220 N?
Klüberoil 4 UH1-220 N is a liquid appearing as oil with colorless color. It has mild odor.
What is Klüberoil 4 UH1-220 N used for?
Lubricant.
What are the hazard statements for Klüberoil 4 UH1-220 N?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects