NextSDS Logo
Safety Data Sheet EN

Klüberoil 4 UH1-460 N

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Klüberoil 4 UH1-460 N
Product Code
029043

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricating oil

Uses advised against

Restricted to professional users.

Manufacturers & Suppliers

K

Klüber Lubrication NA LP

manufacturer

9010 County Road 2120, Tyler, Texas 75707, USA

+1 903 534-8021

Emergency Contacts

NCEC

+1-517-545-7070

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Reproductive toxicity Cat. 2

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H361f Suspected of damaging fertility.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Synthetic hydrocarbon oil ester oil

Chemical Name CAS Number Concentration Hazardous
Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene 68411-46-1 0.1 - 1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Obtain medical attention. Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

Take off all contaminated clothing immediately. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse. Wash off immediately with plenty of water.

Symptoms: irritation

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.

Symptoms: eye irritation

Ingestion

Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do NOT induce vomiting. Obtain medical attention. Rinse mouth with water. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Obtain medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

High volume water jet

Specific hazards

Exposure to decomposition products may be a hazard to health.

Instructions

Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Use personal protective equipment. Ensure adequate ventilation. Do not breathe vapours or spray mist.

Environmental

Try to prevent the material from entering drains or water courses. Prevent further leakage or spillage if safe to do so.

Cleanup methods

collect with non-combustible absorbent material

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not breathe vapours or spray mist. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not repack. Do not re-use empty containers. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.

Storage

Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.

Hygiene

Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle only in a place equipped with local exhaust (or other appropriate exhaust).

Hands

Material: Nitrile rubber; Break through time: > 10 min; Protective index: Class 1; Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case.

Eyes

Safety glasses with side-shields

Respiratory

Not required; except in case of aerosol formation. Filter type: Filter type A-P

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
liquid
Colour
yellow
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
Not applicable
Melting Point
No data available
Boiling Point
No data available
Flash Point
>= 392 °F / 200 °C Method: open cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
< 0.001 hPa (68 °F / 20 °C)
Vapor Density
---
Relative Density
0.859 (68 °F / 20 °C) Reference substance: Water The value is calculated
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
---
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
460 mm2/s (104 °F / 40 °C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No hazards to be specially mentioned.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

No conditions to be specially mentioned.

Incompatible

No materials to be especially mentioned.

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Toxicity to fish : LC50 (Danio rerio (zebra fish)): > 100 mg/l Exposure time: 96 h Test Type: static test Method: OECD Test Guideline 203 Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): 51 mg/l Exposure time: 48 h Test Type: static test Method: OECD Test Guideline 202 Toxicity to algae/aquatic plants : EC50 (Desmodesmus subspicatus (green algae)): > 100 mg/l Exposure time: 72 h Test Type: static test Method: OECD Test Guideline 201

12.2 Persistence and degradability

Biodegradability : Remarks: No data available Physico-chemical removability : Remarks: No data available

No data available.

12.2 Persistence and degradability

Biodegradability : aerobic Inoculum: activated sludge Result: Not rapidly biodegradable Biodegradation: 1 % Exposure time: 28 d Method: OECD Test Guideline 301B GLP: yes

The substance is not rapidly biodegradable.

Bioaccumulative potential

Bioaccumulation: Remarks: This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB).

This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB).

Results of PBT and vPvB assessment

This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB).

The mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT) or very persistent and very bioaccumulating (vPvB).

12.3 Bioaccumulative potential

Partition coefficient: n-octanol/water : log Pow: > 5

12.5 Results of PBT and vPvB assessment

This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB).

The mixture does not contain any substances that meet the criteria for PBT or vPvB.

12.3 Bioaccumulative potential

Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene: Partition coefficient: n-octanol/water : log Pow: > 5

12.4 Mobility in soil

Mobility

Mobility : Remarks: No data available Distribution among environmental compartments : Remarks: No data available

No data available regarding mobility or distribution among environmental compartments.

Other adverse effects

Ozone-Depletion Potential : Regulation: 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances Remarks: This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Do not dispose of with domestic refuse. Dispose of as hazardous waste in compliance with local and national regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Klüberoil 4 UH1-460 N?

The signal word is warning.

What is the physical form of Klüberoil 4 UH1-460 N?

Klüberoil 4 UH1-460 N is a liquid appearing as liquid with yellow color.

What is Klüberoil 4 UH1-460 N used for?

Lubricating oil

What are the hazard statements for Klüberoil 4 UH1-460 N?

This substance has 1 hazard statement:

  • H361f: Suspected of damaging fertility.

What is the melting point of Klüberoil 4 UH1-460 N?

The melting point is No data available and the boiling point is No data available.