Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Klüberoil 4 UH1-320 N
- Product Code
- 029034
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricating oil
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Klüber Lubrication NA LP
manufacturer
9010 County Road 2120, Tyler, Texas 75707, USA
+1 903 534-8021
Klüber Lubrication NA LP
manufacturer
32 Industrial Drive, Londonderry, NH 03053, USA
+1 603 647-4104
Emergency Contacts
NCEC
+1-517-545-7070
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Synthetic hydrocarbon oil ester oil
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzenamine, N-phenyl-, reaction products with 2,4,4-trimethylpentene | 68411-46-1 | 0.1 - 1% | No |
Notes
Actual concentration is withheld as a trade secret
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
Remove contaminated clothing. If irritation develops, get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.
Move the victim to fresh air. Do NOT induce vomiting. Rinse mouth with water.
Immediate Medical Attention
Obtain medical attention if inhaled. If irritation develops after skin contact, get medical attention. If eye irritation persists, consult a specialist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Exposure to decomposition products may be a hazard to health.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.
Try to prevent the material from entering drains or water courses. Prevent further leakage or spillage if safe to do so.
collect with non-combustible absorbent material
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing.
Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.
Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Material: Nitrile rubber, Break through time: > 10 min, Protective index: Class 1, Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case.
Safety glasses with side-shields
Not required; except in case of aerosol formation. Filter type: Filter type A-P
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
No conditions to be specially mentioned.
No materials to be especially mentioned.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
No data available for biodegradability or physico-chemical removability.
12.2 Persistence and degradability
Bioaccumulative potential
This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB).
Results of PBT and vPvB assessment
This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB).
12.3 Bioaccumulative potential
Results of PBT and vPvB assessment
The mixture does not contain any substances classified as PBT or vPvB.
12.3 Bioaccumulative potential
Mobility in soil
Mobility in soil
No data available regarding mobility or distribution among environmental compartments.
Other adverse effects
The product does not contain, nor was it manufactured with, Class I or Class II ozone-depleting substances as defined by the U.S. Clean Air Act.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Klüberoil 4 UH1-320 N?
The signal word is warning.
What is the physical form of Klüberoil 4 UH1-320 N?
Klüberoil 4 UH1-320 N is a liquid appearing as liquid with colourless color. It has characteristic odor.
What is Klüberoil 4 UH1-320 N used for?
Lubricating oil
What are the hazard statements for Klüberoil 4 UH1-320 N?
This substance has 1 hazard statement:
- H361f: Suspected of damaging fertility.
What is the melting point of Klüberoil 4 UH1-320 N?
The melting point is No data available and the boiling point is No data available.