NextSDS Logo
Safety Data Sheet EN

26599-49 StabilCal Formazin Turbidity Standard, 10 NTU

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
26599-49 StabilCal Formazin Turbidity Standard, 10 NTU
Product Code
2659949

Regulatory Identifiers

CAS Number
N/A
UFI Code
V55R-AYJ6-7110-9RAP

Identified Uses

Water analysis

Manufacturers & Suppliers

HACH LANGE GmbH logo

HACH LANGE GmbH

manufacturer

Willstätterstr. 11, D-40549 Düsseldorf

+49 (0)211 5288-383

www.de.hach.com

H

HACH LANGE Ltd.

distributor

5, Pacific Way, Salford Manchester M50 1DL - United Kingdom

+44 (0) 161 872 1487

H

HACH LANGE Ltd.

distributor

Unit 1, Chestnut Road Western Industrial Estate, IRL-Dublin 12

+353 (0)1 4602522

Emergency Contacts

Poison Control Center Mainz

+49 (0) 6131 19240

24 hour emergency service

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Resp. Sens. Cat. 1
Skin Sens. Cat. 1

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 May cause an allergic skin reaction.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Water EC: 231-791-2 7732-18-5 90 - 95% No
methenamine; hexamethylenetetramine EC: 202-905-8 100-97-0 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Skin contact

Wash off immediately with plenty of water.

Eye contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Ingestion

Induce vomiting, but only if victim is fully conscious.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. The product itself does not burn.

Specific hazards

Fire may liberate hazardous vapours.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not flush into surface water or sanitary sewer system.

Cleanup methods

Soak up with inert absorbent material

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas.

Storage

Keep in a dry, cool place.

Fire prevention

See also section 5

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.

Hands

Use barrier skin cream. Chemical resistant gloves made of butyl rubber or nitrile rubber category III according to EN 374. In full contact: Gloves material: Viton, Layer thickness: 0.70 mm, Breakthrough time: >480 min. In splash contact: Glove material: nitrile rubber, Layer thickness 0,20 mm, Breakthrough time: > 30 min

Eyes

Safety glasses with side-shields

Respiratory

Breathing apparatus only if aerosol or dust is formed. Recommended Filter type: ABEK-filter

Skin/Body

Remove and wash contaminated clothing before re-use.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
no data available
Appearance
---
Kinematic Viscosity
no data available
Boiling Point
100 °C
Colour
colourless
Softening Point
not applicable
Ph
8,49
Lower Explosive Limit
not applicable
Physical State Data
liquid
Solubility In Water
completely soluble
Vapor Pressure
no data available
Odor Threshold
---
Density
1,01 g/cm³
Solidification Point
---
Flammability
not applicable
State Under Standard Conditions
---
Bulk Density
not applicable
Odor
odourless
Form
---
Physical State
liquid
Freezing Point
---
Partition Coefficient
no data available
Decomposition Temperature
no data available
Relative Evaporation Rate
---
Properties Status
---
Upper Explosive Limit
not applicable
Crystallisation Point
---
Metal Corrosion
---
Cloud Point
---
Auto Ignition Temperature
no data available
Dynamic Viscosity
no data available
Solubility
---
Colour Intensity
---
Voc Content
---
Relative Density
---
Flash Point
not applicable
Solubility In Fat
---
Explosive Limits
---
Evaporation Rate
---
Vapor Density
---
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

See also section 10.3

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

Extremes of temperature and direct sunlight.

Incompatible

No dangerous reaction known under conditions of normal use. Oxidizing agents

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 26599-49 StabilCal Formazin Turbidity Standard, 10 NTU?

The signal word is danger.

What is the physical form of 26599-49 StabilCal Formazin Turbidity Standard, 10 NTU?

26599-49 StabilCal Formazin Turbidity Standard, 10 NTU is a liquid with colourless color. It has odourless odor.

What is 26599-49 StabilCal Formazin Turbidity Standard, 10 NTU used for?

Water analysis

What are the hazard statements for 26599-49 StabilCal Formazin Turbidity Standard, 10 NTU?

This substance has 2 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.

What is the melting point of 26599-49 StabilCal Formazin Turbidity Standard, 10 NTU?

The melting point is no data available and the boiling point is 100 °C.