Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4
- Product Code
- 9950
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for in-vitro diagnostic use
Manufacturers & Suppliers
RECIPE Chemicals + Instruments GmbH
manufacturer
Dessauerstr. 3, 80992 Munich
+49 (0)89 547081-0
http://www.recipe.de
Emergency Contacts
24-h-Emergency Phone Number
+49 / (0)700 24112112 (RCR)
Mon - Sun 12:00 AM - 11:59 PM
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Lyophilised serum of human origin, spiked with various analytes.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, ABC-powder
Water jet
Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum
---
ClinMass® Internal Standard IS for Trace Elements in Plasma / Serum
---
ClinMass® FAST Carrier Solution for Trace Elements in Plasma / Serum
---
GPC Calibration Standard Solution
---
ClinMass® Autosampler Washing Solution for Trace Elements in Plasma / Serum
---
Calibrators
---
FT4 CalSet
---
FT3 III CalSet
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas.
Control of effects. Protect from sunlight. Protect from moisture.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear protective gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidisers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Shall not be classified as hazardous to the aquatic environment.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
Data are not available.
12.4 Mobility in soil
Data are not available.
12.5 Results of PBT and vPvB assessment
The substance does not contain any PBT or vPvB substances at a concentration of 0.1% or greater.
12.6 Endocrine disrupting properties
The substance does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.
12.7 Other adverse effects
Data are not available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste of this product should be collected and disposed as patient samples.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4?
The signal word is no signal word.
What is the physical form of ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4?
ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4 is a solid (pellets) with yellow color. It has information on this property is not available odor.
What is the solubility of ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4?
not determined
What is ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4 used for?
Product for in-vitro diagnostic use
What is the melting point of ClinCal® Serum Calibrator Set, lyophil., for Trace Elements, Level 1 - 4?
The melting point is not determined and the boiling point is not determined.