NextSDS Logo
Safety Data Sheet EN

WMF Special-Cleaning Tablets 1,3 g

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WMF Special-Cleaning Tablets 1,3 g
Product Code
0063

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaning agent

Manufacturers & Suppliers

I

IBEDA-CHEMIE Klaus P. Christ GmbH

manufacturer

Am Eichelgärtchen 32, DE-56283 Halsenbach

+49 (0)6747-9501-0

Emergency Contacts

GIZ-Nord, Göttingen, Germany

+49 551-19240

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements

P102 Keep out of reach of children.
P264 Wash hands thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water/soap.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P332 + P313 If skin irritation occurs: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium carbonate 497-19-8 10 - 25% Yes
Sodium percarbonate 15630-89-4 10 - 20% Yes
Citric acid, anhydrous 77-92-9 10% Yes
Potassium peroxymonosulfate 70693-62-8 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. In case of respiratory difficulties seek medical attention.

Skin contact

Remove residues with water. In case of skin reactions, consult a physician.

Symptoms: Causes skin irritation.

Eye contact

Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently seek the immediate attention of an ophthalmologist.

Symptoms: Causes serious eye damage.

Ingestion

Rinse mouth and drink large quantities of water. Never give anything by mouth to an unconscious person. Consult physician.

Symptoms: Irritations of mucous membranes in the mouth, pharynx, oesophagus and gastrointestinal tract.

Immediate Medical Attention

In case of respiratory difficulties seek medical attention. Subsequently seek the immediate attention of an ophthalmologist. Consult physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Co-ordinate fire-fighting measures to the fire surroundings.

Specific hazards

Fires in the immediate vicinity may cause the development of dangerous vapors.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with the substance. If possible, eliminate leakage. Provide adequate ventilation.

Environmental

Do not allow to enter into ground-water, surface water or drains.

Cleanup methods

Take up mechanically, placing in appropriate containers for disposal.

Materials: appropriate containers

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Wear appropriate protective equipment.

Storage

Store in a dry place.

Hygiene

Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Take off immediately all contaminated clothing and wash it before reuse.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation. Vent dust from the work area. See also information in chapter 7, section storage.

Hands

Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: Nitrile rubber or butyl caoutchouc (butyl rubber). Observe glove manufacturer's instructions concerning penetrability and breakthrough time.

Eyes

Wear eye protection/safety glasses/face shield.

Respiratory

Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded. Particulates filter P2 according to OSHA Standard - 29 CFR: 1910.134 or ANSI Z88.2.

Skin/Body

Wear suitable protective clothing.

Environmental

Do not allow to penetrate into soil, waterbodies or drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
odorless
Auto Ignition Temperature
No data available
Odor Threshold
No data available
Solubility In Water
soluble
Solubility
---
Physical State
solid
Metal Corrosion
---
Dynamic Viscosity
---
State Under Standard Conditions
---
Colour Intensity
---
Upper Explosive Limit
---
Partition Coefficient
No data available
Relative Density
---
Explosive Limits
---
Melting Point
No data available
Form
Tablets
Colour
white
Relative Evaporation Rate
---
Softening Point
---
Solidification Point
---
Flash Point
No data available
Vapor Density
---
Physical State Data
solid
Molecular Weight
---
Decomposition Temperature
No data available
Bulk Density
---
Evaporation Rate
---
Cloud Point
---
Appearance
solid, Tablets
Boiling Point
No data available
Kinematic Viscosity
---
Crystallisation Point
---
Flammability
---
Ph
9.5 - 10.5 g/cm³ (10%-solution)
Solubility In Fat
---
Density
approx. 2 g/cm³
Vapor Pressure
---
Freezing Point
---
Lower Explosive Limit
---
Voc Content
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Product is stable under normal storage conditions.

Reactivity

Product reacts alkaline.

Hazardous reactions

No hazardous reaction when handled and stored according to provisions.

Avoid

No data available

Incompatible

strong acids and alkalis

Decomposition

In case of fire may be liberated: Sodium compounds, sulphur oxides, phosphorus compounds, carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WMF Special-Cleaning Tablets 1,3 g?

The signal word is danger.

What is the physical form of WMF Special-Cleaning Tablets 1,3 g?

WMF Special-Cleaning Tablets 1,3 g is a solid appearing as solid, tablets with white color. It has odorless odor.

What is WMF Special-Cleaning Tablets 1,3 g used for?

Cleaning agent

What are the hazard statements for WMF Special-Cleaning Tablets 1,3 g?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.

What is the melting point of WMF Special-Cleaning Tablets 1,3 g?

The melting point is No data available and the boiling point is No data available.