3M™ Adhesive Remover 6040/6041 (Aerosol)

Remove person to fresh air. Get medical attention.

Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.

Symptoms: Allergic skin reaction (redness, swelling, blistering, and itching).

Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.

Rinse mouth. If you feel unwell, get medical attention.

Use a fire fighting agent suitable for the surrounding fire.

Closed containers exposed to heat from fire may build pressure and explode.

Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture.

Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.

For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors.

For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water.

Collect as much of the spilled material as possible using non-sparking tools. Place in a metal container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air.

Materials: bentonite, vermiculite, or commercially available inorganic absorbent material; appropriate solvent

Keep out of reach of children. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Use personal protective equipment (gloves, respirators, etc.) as required.

Store in a well-ventilated place. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store away from heat. Store away from acids. Store away from oxidizing agents.

Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use.

Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Use explosion-proof ventilation equipment.

Select and use gloves approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Consult with your glove manufacturer for selection of appropriate compatible gloves. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity. Gloves made from the following material(s) are recommended: Polymer laminate

Full Face Shield, Indirect Vented Goggles

An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates, Half facepiece or full facepiece supplied-air respirator

Select and use protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then use of protective coveralls may be necessary. The following protective clothing material(s) are recommended: Apron - polymer laminate

Stable.

This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.

Hazardous polymerization will not occur.

Heat

Strong oxidizing agents

None known.