NextSDS Logo
Safety Data Sheet EN

APCA 570M

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
APCA 570M
Product Code
DSA1072

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

D

Droley CHEMICALS, LLC

manufacturer

2400 EAST 24TH STREET, CHATTANOOGA TN 37407

1 (423) 624-0086

Emergency Contacts

chemtrec

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 5
Eye Dam. Cat. 1
Skin Corr. Cat. 1A
Oxidizing Liquid Cat. 3

GHS Pictograms

GHS03 - Oxidizing

GHS03

GHS05 - Corrosive

GHS05

Hazard Statements

H272 May intensify fire; oxidizer
H303 May be harmful if swallowed
H314 Causes severe skin burns and eye damage

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P221 Take precaution to avoid mixing with combustibles
P280 Wear protective gloves/eye protection/protective clothing.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302 + P352 IF ON SKIN: Wash with plenty of water for at least 15 minutes or more while removing clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for 15 minutes or more. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents in container in accordance with local/state/federal/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium Nitrite 7632-00-0 10 - 25% Yes
Sodium Hydroxide 1310-73-2 1 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE OXYGEN. IF BREATHING STOPPED, GIVE ARTIFICIAL RESPIRATION

Skin contact

IMMEDIATELY REMOVE CONTAMINATED CLOTHES. WASH SKIN WITH SOAP & WATER.

Eye contact

FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES.

Ingestion

GIVE MILK OR WATER TO DILUTE AND INDUCE VOMITING.

Immediate Medical Attention

IF IRRITATION OCCURS, GET MEDICAL ATTENTION. CONTACT PHYSICIAN OR POISON CONTROL CENTER.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon Dioxide, Water spray.

Instructions

Move containers from fire area if possible. Use water spray to keep fire exposed containers cool until the fire is unusual.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

VENTILATE AREA, PERSONS PERFORMING CLEAN-UP SHOULD WEAR ADEQUATE PROTECTION EQUIPMENT. CONTAIN MATERIAL BY DIKING THE AREA AROUND THE SPILL. IF THE PRODUCT IS IN A SOLID FORM, SHOVEL DIRECTLY INTO RECOVERY DRUMS. IF THE PRODUCT IS A LIQUID, IT SHOULD BE PICKED UP USING A SUITABLE ABSORBANT MATERIAL, THEN SHOVELED TO RECOVERY DRUMS.

Environmental

Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system. Advise water authority if spillage has entered water course or drainage system.

Cleanup methods

Use mechanical handling equipment. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). IF THE PRODUCT IS IN A SOLID FORM, SHOVEL DIRECTLY INTO RECOVERY DRUMS. IF THE PRODUCT IS A LIQUID, IT SHOULD BE PICKED UP USING A SUITABLE ABSORBANT MATERIAL, THEN SHOVELED TO RECOVERY DRUMS.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

MATERIAL SHOULD BE STORED IN ITS OWN CONTAINER AND SHOULD ALWAYS BE KEPT COVERED WHEN NOT IN USE.

Storage

MATERIAL SHOULD BE STORED IN ITS OWN CONTAINER AND SHOULD ALWAYS BE KEPT COVERED WHEN NOT IN USE.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

NORMAL ROOM VENTILATION.

Hands

GLOVES

Eyes

GOGGLES

Respiratory

IF NEEDED, USE A NIOSH APPROVED RESPIRATOR.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
---
Softening Point
---
Bulk Density
---
Evaporation Rate
ND
Solubility
WATER
Relative Density
1.224 +/- 0.005
Voc Content
ND
Vapor Pressure
ND
Form
---
Vapor Density
ND
Crystallisation Point
---
Physical State Data
liquid
Melting Point
---
Properties Status
---
Partition Coefficient
---
Lower Explosive Limit
---
Decomposition Temperature
---
Physical State
Liquid
Explosive Limits
---
Kinematic Viscosity
---
Metal Corrosion
---
Boiling Point
ND
Molecular Weight
---
Freezing Point
---
Upper Explosive Limit
---
Odor Threshold
ND
Solubility In Water
---
Colour
---
Colour Intensity
---
Flash Point
---
Dynamic Viscosity
---
Relative Evaporation Rate
---
Appearance
Liquid
Cloud Point
---
State Under Standard Conditions
---
Density
---
Solidification Point
---
Ph
12.5 +/- 0.75 AS IS
Solubility In Fat
---
Odor
MILD
Flammability
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

STABLE

Hazardous reactions

WILL NOT OCCUR

Avoid

STRONG ACIDS

Incompatible

STRONG ACIDS

Decomposition

NOT ESTABLISHED

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3098
Shipping Name
OXIDIZING LIQUID, CORROSIVE, N.O.S.
Transport Class
5.1 (8)
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for APCA 570M?

The signal word is danger.

What is the physical form of APCA 570M?

APCA 570M is a liquid appearing as liquid . It has mild odor.

What is the solubility of APCA 570M?

WATER

What are the hazard statements for APCA 570M?

This substance has 3 hazard statements:

  • H272: May intensify fire; oxidizer
  • H303: May be harmful if swallowed
  • H314: Causes severe skin burns and eye damage