Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- APCA 587
- Product Code
- DSA1080
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
DOHS CHEMICALS, LLC
manufacturer
2400 EAST 24TH STREET, CHATTANOOGA TN 37407
1 (423) 624-0086
Emergency Contacts
chemtrec
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C10-13 ISOALKANES | 68551-17-7 | 50 - 60% | Yes |
| C10-14 ISOALKANES | 68551-18-8 | 30 - 40% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE OXYGEN. IF BREATHING STOPPED, GIVE ARTIFICIAL RESPIRATION
IMMEDIATELY REMOVE CONTAMINATED CLOTHES. WASH SKIN WITH SOAP & WATER.
FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES.
Immediate Medical Attention
IF IRRITATION OCCURS, GET MEDICAL ATTENTION. IF MATERIAL IS SWALLOWED, GET MEDICAL ATTENTION.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon Dioxide, Water spray.
USE SELF-CONTAINED BREATHING APPARATUS. WEAR FULL PROTECTIVE CLOTHING.
Firefighter Protection
USE SELF-CONTAINED BREATHING APPARATUS. WEAR FULL PROTECTIVE CLOTHING.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
VENTILATE AREA, PERSONS PERFORMING CLEAN-UP SHOULD WEAR ADEQUATE PROTECTION EQUIPMENT. CONTAIN MATERIAL BY DIKING THE AREA AROUND THE SPILL. IF THE PRODUCT IS IN A SOLID FORM, SHOVEL DIRECTLY INTO RECOVERY DRUMS. IF THE PRODUCT IS A LIQUID, IT SHOULD BE PICKED UP USING A SUITABLE ABSORBANT MATERIAL, THEN SHOVELED TO RECOVERY DRUMS.
Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system. Advise water authority if spillage has entered water course or drainage system.
Use mechanical handling equipment. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). IF THE PRODUCT IS IN A SOLID FORM, SHOVEL DIRECTLY INTO RECOVERY DRUMS. IF THE PRODUCT IS A LIQUID, IT SHOULD BE PICKED UP USING A SUITABLE ABSORBANT MATERIAL, THEN SHOVELED TO RECOVERY DRUMS.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Material should be stored in its own container and should always be kept covered when not in use.
Material should be stored in its own container and should always be kept covered when not in use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
NORMAL ROOM VENTILATION.
GLOVES
GOGGLES
IF NEEDED, USE A NIOSH APPROVED RESPIRATOR.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
STABLE
NOT DETERMINED
WILL NOT OCCUR
NONE KNOWN
NONE KNOWN
NOT ESTABLISHED
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for APCA 587?
The signal word is warning.
What is the physical form of APCA 587?
APCA 587 is a liquid appearing as liquid . It has mild odor.
What is the solubility of APCA 587?
0.8985 mg/l
What are the hazard statements for APCA 587?
This substance has 5 hazard statements:
- H319: Causes serious eye irritation
- H320: Causes eye irritation
- H335: May cause respiratory irritation
- H400: Very toxic to aquatic life
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of APCA 587?
The melting point is -55.45 C and the boiling point is 151.5 C.