NextSDS Logo
Safety Data Sheet EN

APCA 378

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
APCA 378
Product Code
DSA1098

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

D

DOOLEY CHEMICALS, LLC

manufacturer

2400 EAST 24TH STREET, CHATTANOOGA TN 37407

1 (423) 624-0086

Emergency Contacts

Chemtrec

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
Met. Corr. Cat. 1
Skin Corr. Cat. 1C
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals
H303 May be harmful if swallowed
H313 May be harmful in contact with skin
H315 Causes skin irritation
H319 Causes serious eye irritation
H333 May be harmful if inhaled

Precautionary Statements

P264 Wash hands thoroughly after handling.
P280 Wear protective gloves/eye protection/protective clothing.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302 + P352 IF ON SKIN: Wash with plenty of water for at least 15 minutes or more while removing clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for 15 minutes or more. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents in container in accordance with local/state/federal/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE OXYGEN. IF BREATHING STOPPED, GIVE ARTIFICIAL RESPIRATION

Skin contact

IMMEDIATELY REMOVE CONTAMINATED CLOTHES. WASH SKIN WITH SOAP & WATER.

Eye contact

FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES.

Ingestion

CONTACT PHYSICIAN OR POISON CONTROL CENTER. IF VICTIM IS CONSCIOUS AND ABLE TO SWALLOW, GIVE MILK OR WATER TO DILUTE. DO NOT GIVE ANYTHING TO AN UNCONSCIOUS PERSON.

Immediate Medical Attention

IF IRRITATION OCCURS, GET MEDICAL ATTENTION.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

USE WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, OR FOAM

Instructions

NONE KNOWN. COOL HEATED CONTAINERS WITH WATER SPRAY, FROM A SAFE DISTANCE, BECAUSE HE

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

VENTILATE AREA, PERSONS PERFORMING CLEAN-UP SHOULD WEAR ADEQUATE PROTECTION EQUIPMENT. CONTAIN MATERIAL BY DIKING THE AREA AROUND THE SPILL. IF THE PRODUCT IS IN A SOLID FORM, SHOVEL DIRECTLY INTO RECOVERY DRUMS. IF THE PRODUCT IS A LIQUID, IT SHOULD BE PICKED UP USING A SUITABLE ABSORBANT MATERIAL, THEN SHOVELED TO RECOVERY DRUMS.

Environmental

Avoid subsoil penetration. Do not flush into surface water or sanitary sewer system. Advise water authority if spillage has entered water course or drainage system.

Cleanup methods

Use mechanical handling equipment. Soak up with inert absorbent material. IF THE PRODUCT IS IN A SOLID FORM, SHOVEL DIRECTLY INTO RECOVERY DRUMS. IF THE PRODUCT IS A LIQUID, IT SHOULD BE PICKED UP USING A SUITABLE ABSORBANT MATERIAL, THEN SHOVELED TO RECOVERY DRUMS.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Material should be stored in its own container and should always be kept covered when not in use.

Storage

Material should be stored in its own container and should always be kept covered when not in use.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

NORMAL ROOM VENTILATION.

Hands

GLOVES

Eyes

FACESHIELD, GOGGLES

Respiratory

IF NEEDED, USE A NIOSH APPROVED RESPIRATOR.

Skin/Body

APRON

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Odor Threshold
ND
Molecular Weight
---
Vapor Pressure
ND
Relative Density
1.239 +/- 0.02
Solubility In Fat
---
Boiling Point
ND
Flammability
---
Evaporation Rate
ND
Density
---
Auto Ignition Temperature
---
State Under Standard Conditions
---
Ph
<2
Appearance
Clear golden liquid
Colour Intensity
---
Freezing Point
---
Melting Point
---
Softening Point
---
Cloud Point
---
Decomposition Temperature
---
Voc Content
ND
Partition Coefficient
---
Vapor Density
ND
Upper Explosive Limit
---
Form
---
Flash Point
ND
Odor
MILD
Dynamic Viscosity
---
Explosive Limits
---
Relative Evaporation Rate
---
Physical State Data
liquid
Metal Corrosion
---
Bulk Density
---
Crystallisation Point
---
Solubility In Water
---
Colour
---
Properties Status
---
Solubility
WATER
Lower Explosive Limit
---
Kinematic Viscosity
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

STABLE

Hazardous reactions

WILL NOT OCCUR

Avoid

STRONG OXIDIZING AGENTS AND STRONG ALKALI

Incompatible

STRONG OXIDIZING AGENTS AND STRONG ALKALI

Decomposition

NOT ESTABLISHED

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3265
Shipping Name
CORROSIVE LIQUID ACIDIC, ORGANIC, N.O.S.
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for APCA 378?

The signal word is warning.

What is the physical form of APCA 378?

APCA 378 is a liquid appearing as clear golden liquid . It has mild odor.

What is the solubility of APCA 378?

WATER

What are the hazard statements for APCA 378?

This substance has 6 hazard statements:

  • H290: May be corrosive to metals
  • H303: May be harmful if swallowed
  • H313: May be harmful in contact with skin
  • H315: Causes skin irritation
  • H319: Causes serious eye irritation
  • H333: May be harmful if inhaled