WD-40 aerosol

Ensure that airways are clear and unobstructed. Keep warm and at rest. If breathing stops or shows signs of failing, apply mouth to mouth ventilation.

Symptoms: difficulty in breathing

Wash copiously with soap and water - remove contaminated clothing, including shoes and launder before re-use.

Symptoms: skin irritation

As soon as possible irrigate thoroughly with water for at least 15 minutes, holding the eyelids apart.

Symptoms: irritation

In the event of deliberate ingestion help must be obtained urgently. Do not induce vomiting. Try to keep patient conscious and try to make certain that patient does not aspirate vomit into lungs.

Symptoms: abdominal pain, vomiting

foam, dry powder, CO² or halons

DO NOT USE WATER

Keep product in storage (and in use) away from sources of ignition. In the event of fire, remove all unaffected product (if possible) away from the immediate vicinity. If necessary cool stocks with water mists.

Place cans in bags or open pail until pressure has dissipated. Wipe affected areas with white spirit or turpentine substitute and allow to dry. When dry wash affected areas with soapy water to remove any remnants of WD-40. If white spirit cannot be applied, layer with sawdust or absorbent material. Allow to dry and then sweep/shovel into refuse bins and dispose of via public or private waste disposal.

In the event of large roadside transport spillages resulting from collision or overturned vehicles, vehicles must be kept away from contaminated roads or other surfaces. Affected areas should be covered in layers of sawdust or similarly absorbent material. Do not wash into drains, waterways or soil courses. Later remove absorbent material to waste disposal site.

Do not wash WD-40 contamination into drains and waterways.

Wipe affected areas with white spirit or turpentine substitute and allow to dry. When dry wash affected areas with soapy water. Layer with sawdust or absorbent material. Sweep/shovel into refuse bins.

Materials: white spirit, turpentine substitute, soapy water, sawdust or absorbent material

Respiratory protection: Advised when concentration of solvent vapour exceeds TLV. Protective gloves: Advised when skin comes into contact with WD-40 regularly or to prevent possible skin irritation. Eye protection: Factory or industrial users are advised to wear protection to guard against potential eye contact.

aerosols should be kept away from sources of ignition or ambient temperatures above 50°Celsius. Do not store large quantities of WD-40 aerosols in unventilated bunkers or enclosures. Keep out of reach of children.

Do not spray on naked flame or any incandescent material. No Smoking near expelled product. aerosols should be kept away from sources of ignition

Considered stable

Will not occur

Incompatible with strong oxidising agents

Thermal decomposition may yield carbon monoxide and/or carbon dioxide.