NextSDS Logo
Safety Data Sheet EN

HP LaserJet CF289A-X-Y-YC Print Cartridge

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HP LaserJet CF289A-X-Y-YC Print Cartridge
Product Code
CF289A-X-Y-YC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

This product is a toner preparation that is used in HP LaserJet Enterprise M507x, M507dn, M507n, M507dng, HP LJ Enterprise Flow MFP M528z, M528c, E52645c, HP LJ Mngd E52645dn, E50145dn, HP LJ Entrprise MFP M528f, M528dn series printers.

Uses advised against

None known.

Manufacturers & Suppliers

H

HP Inc.

manufacturer

1501 Page Mill Road, Palo Alto, CA 94304-1112, United States

650-857-1501

Emergency Contacts

HP Inc. health effects line (Toll-free within the US)

1-800-457-4209

HP Inc. health effects line (Direct)

1-760-710-0048

HP Inc. Customer Care Line (Toll-free within the US)

1-800-474-6836

HP Inc. Customer Care Line (Direct)

1-208-323-2551

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified
Not Classified
Not Classified
Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Water 7732-18-5 10% No
Wax --- 7.5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air immediately. If irritation persists, consult a physician.

Skin contact

Wash affected areas thoroughly with mild soap and water. Get medical attention if irritation develops or persists.

Eye contact

Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at least 15 minutes or until particles are removed. If irritation persists, consult a physician.

Ingestion

Rinse mouth with water. Drink one to two glasses of water. If symptoms occur, consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, water, or dry chemical

Unsuitable media

None known.

Specific hazards

Like most organic material in powder form, toner can form explosive dust-air mixtures when finely dispersed in air.

Instructions

If fire occurs in the printer, treat as an electrical fire.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin and eyes.

Environmental

Keep out of waterways

Cleanup methods

Slowly vacuum or sweep the material into a bag or other sealed container. Clean remainder with a damp cloth or vacuum cleaner.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep out of the reach of children. Avoid inhalation of dust and contact with skin and eyes. Use with adequate ventilation. Keep away from excessive heat, sparks, and open flames.

Storage

Keep out of the reach of children. Keep tightly closed and dry. Store at room temperature. Store away from strong oxidizers.

Hygiene

Avoid contact with skin and eyes.

Fire prevention

Keep away from excessive heat, sparks, and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

None established. No exposure limits noted for ingredient(s).

Hands

No personal hand protective equipment required under normal conditions of use.

Eyes

No personal eye/face protective equipment required under normal conditions of use.

Respiratory

No personal respiratory protective equipment required under normal conditions of use.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Fine powder
Colour
Black.
Colour Intensity
---
Form
solid
Odor
Slight plastic odor
Odor Threshold
Not available.
Ph
Not applicable
Melting Point
---
Boiling Point
Not applicable
Flash Point
Not applicable
Freezing Point
---
Softening Point
194 - 284 °F (90 - 140 °C)
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
Not applicable
Relative Density
1.4 - 1.8
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not flammable
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
392 °F (200 °C)
Solubility
---
Partition Coefficient
Not available.
Solubility In Water
Negligible in water. Partially soluble in toluene and xylene.
Solubility In Fat
---
Molecular Weight
---
Voc Content
Not applicable
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage conditions.

Reactivity

Not available.

Hazardous reactions

None.

Avoid

None.

Incompatible

Acids, Bases, Oxidizing agents, Reducing agents.

Decomposition

Carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HP LaserJet CF289A-X-Y-YC Print Cartridge?

The signal word is no signal word.

What is the physical form of HP LaserJet CF289A-X-Y-YC Print Cartridge?

HP LaserJet CF289A-X-Y-YC Print Cartridge is a liquid. appearing as fine powder with black. color. It has slight plastic odor odor.

What is HP LaserJet CF289A-X-Y-YC Print Cartridge used for?

This product is a toner preparation that is used in HP LaserJet Enterprise M507x, M507dn, M507n, M507dng, HP LJ Enterprise Flow MFP M528z, M528c, E52645c, HP LJ Mngd E52645dn, E50145dn, HP LJ Entrprise MFP M528f, M528dn series printers.