NextSDS Logo
Safety Data Sheet EN

ENFORCER WASP & YELLOW JACKET FOAM V 24N16 12CT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ENFORCER WASP & YELLOW JACKET FOAM V 24N16 12CT
Product Code
FWH16

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Z

Zep Commercial Sales & Service, a unit of Zep, Inc.

manufacturer

350 Joe Frank Harris Parkway, SE Emerson, GA 30137

877-428-9937

Emergency Contacts

Compliance Services

877-428-9937

Medical Emergency

877-541-2016

CHEMTREC

800-424-9300

CHEMTREC

202-483-7616

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aerosol Cat. 2
Gases under pressure

GHS Pictograms

GHS02 - Flammable

GHS02

GHS04 - Compressed gas

GHS04

Hazard Statements

H223 Flammable aerosol.
H280 Contains gas under pressure; may explode if heated.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Hazardous components

Chemical Name CAS Number Concentration Hazardous
propane 74-98-6 5 - 10% Yes
butane 106-97-8 3 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If unconscious, place in recovery position and seek medical advice. Consult a physician after significant exposure.

Skin contact

If skin irritation persists, call a physician. Wash off immediately with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash contaminated clothing before re-use.

Eye contact

Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. Rinse immediately with plenty of water for at least 15 minutes.

Ingestion

Keep respiratory tract clear. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. DO NOT induce vomiting unless directed to do so by a physician or poison control center. Take victim immediately to hospital.

Immediate Medical Attention

Get medical attention. Take victim immediately to hospital.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical, Water spray jet

Unsuitable media

High volume water jet

Specific hazards

Do not allow run-off from fire fighting to enter drains or water courses.

Instructions

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Firefighter Protection

Wear self-contained breathing apparatus for firefighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.

Environmental

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains, inform respective authorities.

Cleanup methods

Sweep up or vacuum up spillage and collect in suitable container for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. Do not breathe vapours or spray mist. Take precautionary measures against static discharges. Always replace cap after use.

Storage

Keep in a dry, cool and well-ventilated place. Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 °C.

Hygiene

Smoking, eating and drinking should be prohibited in the application area.

Fire prevention

Take precautionary measures against static discharges. No smoking. Do not spray on flames or red-hot objects.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

effective ventilation in all processing areas

Hands

Material: Protective gloves. Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Eyes

Access to clean water to rinse eyes must be available, options include: eye wash stations or showers, or eye wash bottles with pure water. Safety glasses

Respiratory

Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.

Skin/Body

Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
No data available
Dynamic Viscosity
---
Cloud Point
---
Colour
clear
Ph
Not applicable
Bulk Density
---
Solubility In Water
soluble in cold water, soluble in hot water
Solidification Point
---
State Under Standard Conditions
---
Evaporation Rate
1
Metal Corrosion
---
Relative Density
---
Melting Point
No data available
Lower Explosive Limit
No data available
Vapor Density
---
Physical State
Aerosol containing a liquefied gas
Density
0.975 g/cm3
Odor Threshold
No data available
Flammability
Flammable aerosol.
Upper Explosive Limit
No data available
Form
---
Physical State Data
aerosol
Softening Point
---
Colour Intensity
---
Decomposition Temperature
No data available
Kinematic Viscosity
No data available
Properties Status
---
Solubility
---
Boiling Point
102 °C
Flash Point
not determined
Solubility In Fat
---
Freezing Point
---
Explosive Limits
---
Appearance
Aerosol containing a liquefied gas
Vapor Pressure
not determined
Auto Ignition Temperature
not determined
Crystallisation Point
---
Voc Content
---
Relative Evaporation Rate
---
Molecular Weight
---
Odor
mild, characteristic
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Stable

Hazardous reactions

Vapours may form explosive mixture with air. No decomposition if stored and applied as directed.

Avoid

Heat, flames and sparks. Extremes of temperature and direct sunlight.

Incompatible

Acids

Decomposition

Carbon oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols, flammable
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ENFORCER WASP & YELLOW JACKET FOAM V 24N16 12CT?

The signal word is warning.

What is the physical form of ENFORCER WASP & YELLOW JACKET FOAM V 24N16 12CT?

ENFORCER WASP & YELLOW JACKET FOAM V 24N16 12CT is a aerosol containing a liquefied gas appearing as aerosol containing a liquefied gas with clear color. It has mild, characteristic odor.

What are the hazard statements for ENFORCER WASP & YELLOW JACKET FOAM V 24N16 12CT?

This substance has 2 hazard statements:

  • H223: Flammable aerosol.
  • H280: Contains gas under pressure; may explode if heated.

What is the melting point of ENFORCER WASP & YELLOW JACKET FOAM V 24N16 12CT?

The melting point is No data available and the boiling point is 102 °C.