Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZEP FOAMING COIL CLEANER 20N18 12CT
- Product Code
- 000000000000020201
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Zep Inc.
manufacturer
350 Joe Frank Harris Parkway, SE Emerson, GA 30137
877-428-9937
Emergency Contacts
Compliance Services
877-428-9937
Medical Emergency
877-541-2016
CHEMTREC
800-424-9300
CHEMTREC
202-483-7616
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS04
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous components
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-(1-methyl-2-propoxyethoxy)propan-2-ol | 29911-27-1 | 3 - 5% | Yes |
| butane | 106-97-8 | 3 - 5% | Yes |
| propane-1,2-diol | 57-55-6 | 1 - 3% | Yes |
| propane | 74-98-6 | 1 - 3% | Yes |
| sodium nitrite | 7632-00-0 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Remove contact lenses. Rinse immediately with plenty of water for at least 15 minutes. Keep eye wide open while rinsing.
Keep respiratory tract clear. Never give anything by mouth to an unconscious person. DO NOT induce vomiting unless directed to do so by a physician or poison control center.
Medical Treatment
Treat symptomatically. Symptoms may be delayed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Prevent further leakage or spillage if safe to do so.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. Take precautionary measures against static discharges. Always replace cap after use. Do not breathe vapours or spray mist.
BEWARE: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 °C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep in a dry, cool and well-ventilated place. Observe label precautions. Do not freeze.
Smoking, eating and drinking should be prohibited in the application area.
Take precautionary measures against static discharges. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
effective ventilation in all processing areas
Material: Protective gloves. Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Tightly fitting safety goggles
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.
Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable
Vapours may form explosive mixture with air. No decomposition if stored and applied as directed.
Heat, flames and sparks. Extremes of temperature and direct sunlight.
Oxidizing agents Acids
Carbon oxides Organic Substances
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS, NON-FLAMMABLE
- Transport Class
- 2.2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZEP FOAMING COIL CLEANER 20N18 12CT?
The signal word is danger.
What is the physical form of ZEP FOAMING COIL CLEANER 20N18 12CT?
ZEP FOAMING COIL CLEANER 20N18 12CT is a aerosol containing a liquefied gas appearing as aerosol containing a liquefied gas with colourless, clear color. It has characteristic odor.
What is the solubility of ZEP FOAMING COIL CLEANER 20N18 12CT?
soluble in hot water, soluble in cold water
What are the hazard statements for ZEP FOAMING COIL CLEANER 20N18 12CT?
This substance has 2 hazard statements:
- H280: Contains gas under pressure; may explode if heated.
- H314: Causes severe skin burns and eye damage.
What is the melting point of ZEP FOAMING COIL CLEANER 20N18 12CT?
The melting point is Not applicable and the boiling point is 100 °C.