Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ARC GUN GRADE EXPANDING PU FOAM
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- KQSQ-N02E-C11N-V6T4
Identified Uses
Polyurethane foam sealant
Manufacturers & Suppliers
Arc Building Products
national supplier
IDA Business & Technology Park, Ballynattin, Arklow, Co. Wicklow, Ireland. Y14 A370
+353 (0)402 32370
Emergency Contacts
Emergency Contact
+353 (0)402 32370
Office hours only
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS02
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, seek medical advice in case of necessity.
IF ON SKIN: Wash with plenty of soap and water. Get medical advice if you feel unwell. Take off contaminated clothing and wash before reuse.
Symptoms: skin irritation or rash
Immediately flush with plenty of water for at least 15 minutes. If eyelids are bonded closed, do not force eye open. Get medical attention.
Symptoms: Causes serious eye irritation.
Consult with a doctor in case swallowing. Rinse mouth.
Symptoms: Harmful if swallowed.
Immediate Medical Attention
Get medical advice/attention. Call a POISON CENTER or doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All common extinguishing agents are suitable. Foam, carbon dioxide, dry powder, water spray
None known.
Isocyanate vapors and other irritating or toxic gases may occur during inflammation.
Keep unnecessary people away, isolate hazard area and deny entry. Cool containers with water from unmanned hose holder or monitor nozzles until well after fire is out.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Keep children away. Provide ventilation. Keep away from igniting sources. Keep away from naked flame or any incandescent material.
Do not empty into drains or water.
Flood with water to complete polymerization and scrape off the floor.
Materials: water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Avoid breathing vapor and mists. Do not drink, eat and smoke in the working area. Wash hands thoroughly after handling. Use nitrile gloves and protective glass during handling. Exposure to vapors of heated MDI can be extremely dangerous do not enter closed areas where isocyanate vapors may be gathered.
Keep in a cool, well-ventilated area in original container. Away from heat, sparks and open flame.
Do not drink, eat and smoke in the working area. Wash hands thoroughly after handling.
Away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. Use explosion-proof electrical/ventilating/lighting equipment. Keep away from heat sparks/open flames/hot surfaces.
Wear refractive gloves while working with the hot melt.
Wear protective goggles
In case of dust formation, we recommend wearing of appropriate respiratory protection equipment with particle filter P. This recommendation should be matched to local conditions.
Wear protective equipment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
May polymerized when heated.
See section reactivity
Keep away from sunlight and do not expose temperatures above 50°C. Protect containers from physical damage. Keep away from heat, flame and spark. Do not pierce or burn, even after use.
active hydrogen and water containing materials
Isocyanate vapors and other irritating or toxic gases may occur during inflammation. In case of exposure to heat the extremely dangerous combustion products like oxides of carbon and nitrogen may occur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1. Toxicity
12.1. Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1. Toxicity
12.2. Persistence and degradability
The substance is not biodegradable.
12.2. Persistence and degradability
Propane is classified as not biodegradable.
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
No data available.
12.4. Mobility in soil
No data available.
12.5. Results of PBT and vPvB assessment
The mixture does not contain PBT or vPvB substances above 0.1%.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In consultation with the responsible local authority, must be subjected to special treatment.
If it is possible, try to reuse the mixture.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOL, flammable
- Transport Class
- 2.1
- Packing Group
- 2
Avoid high temperature.
Avoid high temperature.
Avoid high temperature.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
According to EC directive on health and safety precautions while working with chemicals (2009/161/EU) and 2020/878 Directive on Carcinogens or mutagens at work (2004/37/EC) there are no limitations on the products and materials.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ARC GUN GRADE EXPANDING PU FOAM?
The signal word is danger.
What is the physical form of ARC GUN GRADE EXPANDING PU FOAM?
ARC GUN GRADE EXPANDING PU FOAM is a aerosol, liquid appearing as aerosol, liquid with light blue color. It has characteristic odor.
What is the solubility of ARC GUN GRADE EXPANDING PU FOAM?
Insoluble in water reacts with water.
What is ARC GUN GRADE EXPANDING PU FOAM used for?
Polyurethane foam sealant
What are the hazard statements for ARC GUN GRADE EXPANDING PU FOAM?
This substance has 7 hazard statements:
- H222: Extremely flammable aerosol.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H351: Suspected of causing cancer.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of ARC GUN GRADE EXPANDING PU FOAM?
The melting point is Not Applicable and the boiling point is Not Applicable.