NextSDS Logo
Safety Data Sheet EN

Jasco Odorless Mineral Spirits

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Jasco Odorless Mineral Spirits
Product Code
GJSP140P, QJSP144, QJSP244

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Paint, stain, and varnish thinning.

Manufacturers & Suppliers

W. M. Barr logo

W. M. Barr

manufacturer

2105 Channel Avenue, Memphis, TN 38113

(901)775-0100

http://www.wmbarr.com

Emergency Contacts

3E 24 Hour Emergency Contact

(800)451-8346

24 Hour

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Skin Irrit. Cat. 2
STOT SE Cat. 3
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P233 Keep container tightly closed.
P235 Keep cool.
P241 Use explosion-proof electrical/ventilating/lighting equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing gas/mist/vapors/spray.
P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment see label.
P331 Do NOT induce vomiting.
P332 + P313 If skin irritation occurs, get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash before re-use.
P403 + P233 Store container tightly closed in well-ventilated place.
P405 Store locked up.
P501 Dispose of contents/container according to local, state and federal regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
Hydrotreated light distillate (petroleum, mineral spirits) 64742-47-8 80 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If user experiences breathing difficulty, move to air free of vapors. Administer oxygen or artificial respiration until medical assistance can be rendered.

Skin contact

Wash with soap and large quantities of water for at least 15 minutes. Seek medical attention if irritation from contact persists.

Eye contact

Immediately flush eyes with water, remove nay contact lens, continue flushing with water for at least 15 minutes. Get medical attention.

Ingestion

Do not induce vomiting. Call your poison control center, hospital emergency room, or physician immediately.

Immediate Medical Attention

Seek medical attention if irritation from contact persists. Get medical attention. Call your poison control center, hospital emergency room, or physician immediately.

Medical Treatment

Call your local poison control center for further instructions.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use carbon dioxide, dry chemical powder, or foam.

Instructions

Self-contained respiratory protection should be provided for fire fighters fighting fires in buildings or confined areas. Storage containers exposed to fire should be kept cool with water spray to prevent pressure build-up. Stay away from heads of containers that have been exposed to intense heat or flame.

Firefighter Protection

Self-contained respiratory protection should be provided for fire fighters fighting fires in buildings or confined areas.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unnecessary people away, isolate hazard area and deny entry. Stay upwind, out of low areas, and ventilate closed spaces before entering. Shut off ignition sources, keep flares, smoking or flames out of hazard area.

Small spill

Take up the spilled liquid with sand, earth, or other noncombustible absorbent material and place in a plastic container where applicable.

Large spill

Dike far ahead of spill for later disposal.

Cleanup methods

Take up the spilled liquid with sand, earth, or other noncombustible absorbent material and place in a plastic container where applicable.

Materials: sand, earth, or other noncombustible absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Read carefully all cautions and directions on product label before use. Since empty container retains residue, follow all label warnings even after container is empty. Dispose of empty container according to all regulations. Do not reuse this container.

Storage

Keep container tightly closed when not in use. Store in a cool, dry place. Do not store near flames or at elevated temperatures.

Fire prevention

Do not store near flames or at elevated temperatures.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only with adequate ventilation to prevent build-up of vapors. Open all windows and doors. Use only with a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness, headache, nausea, or eye-watering -- Stop -- ventilation is inadequate. Leave area immediately.

Hands

Wear impermeable gloves. Gloves contaminated with product should be discarded. Promptly remove clothing that becomes soiled with product.

Eyes

Safety glasses, chemical goggles or face shields are recommended to safeguard against potential eye contact, irritation, or injury. Contact lenses should not be worn while working with chemicals.

Respiratory

For OSHA controlled work place and other regular users. Use only with adequate ventilation under engineered air control systems designed to prevent exceeding appropriate TLV. For occasional use, where engineered air control is not feasible, use properly maintained and properly fitted NIOSH approved respirator for organic solvent vapors. A dust mask does not provide protection against vapors.

Skin/Body

Various application methods can dictate use of additional protective safety equipment, such as impermeable aprons, etc., to minimize exposure. Before reuse, thoroughly clean any clothing or protective equipment that has been contaminated by prior use. Discard any clothing or other protective equipment that cannot be decontaminated, such as gloves or shoes.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Colorless to light yellow
Colour
---
Colour Intensity
---
Form
---
Odor
Solvent odor
Odor Threshold
---
Ph
N.D.
Melting Point
-72.40 F
Boiling Point
318.20 F - 354.20 F
Flash Point
> 105.80 F
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
< 1 (BuAC=1)
Vapor Pressure
3 MM HG at 25.0 C
Vapor Density
4.5 Air = 1
Relative Density
0.78
Bulk Density
---
Density
6.5
Flammability
No data available.
Upper Explosive Limit
5.5
Lower Explosive Limit
.6
Explosive Limits
---
Auto Ignition Temperature
456.80 F
Decomposition Temperature
No data.
Solubility
---
Partition Coefficient
No data.
Solubility In Water
Slight (1.5 g/l)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
N.D.
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Hazardous reactions

Will not occur

Avoid

Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not allow vapor to accumulate in low or confined areas. Do not store with strong oxidizing agents.

Incompatible

Incompatible with strong oxidizing agents.

Decomposition

Thermal decomposition may produce carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1263
Shipping Name
Paint related material
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Jasco Odorless Mineral Spirits?

The signal word is danger.

What is the physical form of Jasco Odorless Mineral Spirits?

Jasco Odorless Mineral Spirits is a liquid appearing as colorless to light yellow . It has solvent odor odor.

What is Jasco Odorless Mineral Spirits used for?

Paint, stain, and varnish thinning.

What are the hazard statements for Jasco Odorless Mineral Spirits?

This substance has 4 hazard statements:

  • H226: Flammable liquid and vapor.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of Jasco Odorless Mineral Spirits?

The melting point is -72.40 F and the boiling point is 318.20 F - 354.20 F.