Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Klean Strip Odorless Mineral Spirits
- Product Code
- GKSP94006P, QKSP94005, QKSP945, GKSP94006, GKSP94214
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint, stain, and varnish thinning.
Manufacturers & Suppliers
W. M. Barr
manufacturer
2105 Channel Avenue, Memphis, TN 38113
(901)775-0100
http://www.wmbarr.com
Emergency Contacts
3E 24 Hour Emergency Contact
(800)451-8346
24 Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrotreated light distillate (petroleum, mineral spirits) | 64742-47-8 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If user experiences breathing difficulty, move to air free of vapors. Administer oxygen or artificial respiration until medical assistance can be rendered.
Wash with soap and large quantities of water for at least 15 minutes. Seek medical attention if irritation from contact persists.
Immediately flush eyes with water, remove nay contact lens, continue flushing with water for at least 15 minutes. Get medical attention.
Do not induce vomiting. Call your poison control center, hospital emergency room, or physician immediately.
Immediate Medical Attention
Seek medical attention if irritation from contact persists (skin). Get medical attention (eyes). Call your poison control center, hospital emergency room, or physician immediately (ingestion).
Medical Treatment
Call your local poison control center for further instructions.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use carbon dioxide, dry chemical powder, or foam.
Storage containers exposed to fire should be kept cool with water spray to prevent pressure build-up. Stay away from heads of containers that have been exposed to intense heat or flame.
Firefighter Protection
Self-contained respiratory protection should be provided for fire fighters fighting fires in buildings or confined areas.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary people away, isolate hazard area and deny entry. Stay upwind, out of low areas, and ventilate closed spaces before entering. Shut off ignition sources, keep flares, smoking or flames out of hazard area.
Take up the spilled liquid with sand, earth, or other noncombustible absorbent material and place in a plastic container where applicable.
Dike far ahead of spill for later disposal.
Take up the spilled liquid with sand, earth, or other noncombustible absorbent material and place in a plastic container where applicable.
Materials: sand, earth, or other noncombustible absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Read carefully all cautions and directions on product label before use. Since empty container retains residue, follow all label warnings even after container is empty. Dispose of empty container according to all regulations. Do not reuse this container.
Keep container tightly closed when not in use. Store in a cool, dry place. Do not store near flames or at elevated temperatures.
Do not store near flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only with adequate ventilation to prevent build-up of vapors. Open all windows and doors. Use only with a cross ventilation of moving fresh air across the work area. If strong odor is noticed or you experience slight dizziness, headache, nausea, or eye-watering -- Stop -- ventilation is inadequate. Leave area immediately.
Wear impermeable gloves. Gloves contaminated with product should be discarded. Promptly remove clothing that becomes soiled with product.
Safety glasses, chemical goggles or face shields are recommended to safeguard against potential eye contact, irritation, or injury. Contact lenses should not be worn while working with chemicals.
For OSHA controlled work place and other regular users. Use only with adequate ventilation under engineered air control systems designed to prevent exceeding appropriate TLV. For occasional use, where engineered air control is not feasible, use properly maintained and properly fitted NIOSH approved respirator for organic solvent vapors. A dust mask does not provide protection against vapors.
Various application methods can dictate use of additional protective safety equipment, such as impermeable aprons, etc., to minimize exposure. Before reuse, thoroughly clean any clothing or protective equipment that has been contaminated by prior use. Discard any clothing or other protective equipment that cannot be decontaminated, such as gloves or shoes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Will not occur
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not allow vapor to accumulate in low or confined areas. Do not store with strong oxidizing agents.
Incompatible with strong oxidizing agents.
Thermal decomposition may produce carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1263
- Shipping Name
- Paint related material
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Klean Strip Odorless Mineral Spirits?
The signal word is danger.
What is the physical form of Klean Strip Odorless Mineral Spirits?
Klean Strip Odorless Mineral Spirits is a liquid appearing as colorless to light yellow . It has solvent odor odor.
What is Klean Strip Odorless Mineral Spirits used for?
Paint, stain, and varnish thinning.
What are the hazard statements for Klean Strip Odorless Mineral Spirits?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapor.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Klean Strip Odorless Mineral Spirits?
The melting point is -72.40 F and the boiling point is 318.20 F - 354.20 F.