NextSDS Logo
Safety Data Sheet EN

COTTON BREEZE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
COTTON BREEZE
Product Form
Mixture
Product Code
568007

Regulatory Identifiers

CAS Number
N/A

Identified Uses

An aerosol fragrance for use in Airfresh units by Initial service staff.

Uses advised against

No additional information available

Manufacturers & Suppliers

R

Rentokil Initial Supplies

national supplier

Liverpool, L33 7SR, UK

+44 (0)151 548 5050

I

Initial Hygiene

national supplier

Level 1, 89 Carbine Road, Mt Wellington, Auckland 1060, Private Bag 92905, Onehunga, Auckland 1643, New Zealand

Emergency Contacts

Emergency Contact

+64 (09) 573 7740

National Poisons & Hazardous Chemical Information Centre Dunedin School of Medicine, University of Otago

0800 POISON (0800 764 766)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Acute Tox. Cat. 5 H303
Aquatic Acute Cat. 2 H401
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol
H302 May be harmful if swallowed
H411 Toxic to aquatic life
H412 Harmful to aquatic life with long lasting effects

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P211 Do not spray on an open flame or other ignition source
P251 Do not pierce or burn, even after use
P273 Avoid release to the environment
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F
P501 Dispose of contents/container to an approved waste disposal plant.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Butane 106-97-8 25 - 50% Yes
Isobutane 75-28-5 10 - 25% Yes
Propane 74-98-6 10 - 25% Yes
Benzyl acetate 140-11-4 2.5 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Assure fresh air breathing. Allow the victim to rest.

Symptoms: Cough. Shortness of breath. In high concentrations may cause asphyxiation. Symptoms may include loss of mobility/consciousness. Victim may not be aware of asphyxiation.

Skin contact

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.

Symptoms: Contact with the liquid the may cause cold burns/frostbite.

Eye contact

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist.

Symptoms: Direct contact with the eyes is likely to be irritating. Contact with the liquid may cause frostbite and serious damage to eyes.

Ingestion

Ingestion is not considered a potential route of exposure. Rinse mouth out with water.

Immediate Medical Attention

If skin irritation or rash occurs: Get medical advice/attention. Obtain medical attention if pain, blinking or redness persist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Extremely flammable aerosol. Heat may build pressure, rupturing closed containers, spreading fire and increasing risk of burns and injuries.

Instructions

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment. DO NOT fight fire when fire reaches explosives. Evacuate area.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Ventilate area.

Environmental

Avoid release to the environment.

Cleanup methods

Ventilate the area thoroughly. Keep area evacuated and free from ignition sources until any spilled liquid has evaporated.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not spray on an open flame or other ignition source. Hazardous waste due to potential risk of explosion. Pressurised container: Do not pierce or burn, even after use.

Storage

Store in a well-ventilated place. Keep cool. Protect from heat and direct sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Not required for normal conditions of use. Ensure adequate ventilation, especially in confined areas.

Hands

Avoid contact with skin. Wear chemically resistant gloves (tested to EN374) in combination with 'basic' employee training.

Eyes

Wear eye protection. Avoid contact with eyes.

Respiratory

Not necessary under the recommended storage and handling conditions.

Skin/Body

Avoid contact with skin. Wear suitable protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colourless.
Colour Intensity
---
Form
---
Odor
characteristic.
Odor Threshold
No data available
Ph
No data available
Melting Point
No data available
Boiling Point
-11 °C
Flash Point
< -60 °C
Freezing Point
No data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
No data available
Vapor Density
---
Relative Density
No data available
Bulk Density
---
Density
---
Flammability
No data available
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Extremely flammable aerosol. Can form explosive mixture with air. Contains gas under pressure; may explode if heated. Extreme risk of explosion by shock, friction, fire or other sources of ignition. May react violently with oxidants.

Reactivity

To our knowledge, the product does not present any particular risk, under normal conditions of use.

Hazardous reactions

Not established.

Avoid

Direct sunlight. Extremely high or low temperatures. Heat. Sparks. Open flame. Overheating.

Incompatible

Strong acids. Strong bases.

Decomposition

Fume. Carbon monoxide. Carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for COTTON BREEZE?

The signal word is danger.

What is the physical form of COTTON BREEZE?

COTTON BREEZE is a liquid with colourless. color. It has characteristic. odor.

What is the solubility of COTTON BREEZE?

No data available

What is COTTON BREEZE used for?

An aerosol fragrance for use in Airfresh units by Initial service staff.

What are the hazard statements for COTTON BREEZE?

This substance has 4 hazard statements:

  • H222: Extremely flammable aerosol
  • H302: May be harmful if swallowed
  • H411: Toxic to aquatic life
  • H412: Harmful to aquatic life with long lasting effects

What is the melting point of COTTON BREEZE?

The melting point is No data available and the boiling point is -11 °C.