Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DUPLI-COLOR Aerosol Art RAL
- Product Form
- Aerosol
- Product Code
- 126185 - 126208, 131349 -131622, 144134, 216022, 221187-221224, 254932, 354731, 381119, 454400 - 454426, 466588 - 468056, 655814 / 655821, 666216, 666223, 666391 - 666513, 667268, 668449 - 668777, 722479 - 722691, 732584, 732898 - 741555, 744396, 744402, 744419, 747526 - 747540, 769757, 775611, 775635, 787829 - 787867, 789847
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PC9a Coatings and paints, thinners, paint removers, PROC7 Industrial spraying, PROC11 Non industrial spraying, Lacquer
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49/6266/75-0
Emergency Contacts
Emergency Contact
+49 6266-75-310
Mo - Th 08:00 am - 04:00 pm, Fr 08:00 am - 00:30 pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 12.5 - 20% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 5 - 10% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 5 - 10% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 2.5 - 5% | Yes |
| cellulose nitrate | 9004-70-0 | 2.5% | Yes |
| xylene, mixture of isomers EC: 215-535-7 | 1330-20-7 | 2.5% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0.1% (Note P Annex 1A 1272/2008 EU), so the classification as carcinogen need not to apply.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
During heating or in case of fire: poisonous gases are produced.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.
Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
DUPLI-COLOR Color Spray Quality Paint (glossy)
---
DUPLI-COLOR Color Spray Quality Paint (silk mat)
---
DUPLI-COLOR Sprayplast different colours 400ml
---
DUPLI-COLOR Sprayplast different colours 750ml, 3000ml
---
DUPLI-COLOR Sprayplast Verdünner 375ml
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Keep container tightly sealed. Observe official regulations on storing packagings with pressurised containers.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of contact with spray dust protective gloves made of butyl shoud be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products. Solvent resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber, BR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable: Natural rubber, NR
Tightly sealed goggles
Filter AX. Not necessary if room is well-ventilated. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DUPLI-COLOR Aerosol Art RAL?
The signal word is danger.
What is the physical form of DUPLI-COLOR Aerosol Art RAL?
DUPLI-COLOR Aerosol Art RAL is a aerosol appearing as according to product specification with according to product specification color. It has characteristic odor.
What is DUPLI-COLOR Aerosol Art RAL used for?
SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PC9a Coatings and paints, thinners, paint removers, PROC7 Industrial spraying, PROC11 Non industrial spraying, Lacquer
What are the hazard statements for DUPLI-COLOR Aerosol Art RAL?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of DUPLI-COLOR Aerosol Art RAL?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..