Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- arecal Markierungsfarbe 360° blau
- Product Code
- 0897332500
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint
Uses advised against
None known.
Manufacturers & Suppliers
Kellner & Kunz AG
national supplier
Boschstr. 37, 4600 Wels / AUSTRIA
0043-7242-484-0
http://www.reca.co.at
Emergency Contacts
Advisory body
+43 (0) 1 406 43 43
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| iso-Butane EC: 200-857-2 | 75-28-5 | 10 - 25% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 20 - 25% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 20 - 25% | Yes |
| Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 927-241-2 | --- | 2.5 - 10% | Yes |
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 918-481-9 | --- | 2.5 - 10% | Yes |
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 2.5 - 10% | Yes |
| 2-Methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 2.5 - 10% | Yes |
Notes
Substances of Very High Concern - SVHC: substances are not contained or are below 0.1%. For full text of H-statements: see SECTION 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. In the event of symptoms seek medical treatment.
When in contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Rinse out mouth and give plenty of water to drink. Do not induce vomiting. Consult a doctor immediately.
Immediate Medical Attention
Consult a doctor immediately (ingestion). Seek medical treatment in the event of symptoms (inhalation). Consult a doctor if skin or eye irritation persists.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry powder, water spray jet, carbon dioxide.
Full water jet.
Bursting aerosols can be forcibly projected from a fire.
Cool containers at risk with water spray jet.
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not discharge into the drains/surface waters/groundwater.
Take up residues with absorbent material (f.ex. diatomaceous earth).
Materials: diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Vapours/spray can form an explosive mixture with air. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking. Do not eat, drink, smoke or take drugs at work. Take off contaminated clothing and wash before reuse. Wash hands before breaks and after work. Use barrier skin cream.
Provide solvent-resistant and impermeable floor. Keep in a cool place, heat causes increase in pressure and risk of bursting. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C.
Do not eat, drink, smoke or take drugs at work. Take off contaminated clothing and wash before reuse. Wash hands before breaks and after work. Use barrier skin cream.
Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation on workstation. Measurement methods for taking workplace measurements must meet the performance requirements of DIN EN 482. For example, recommendations are given in the IFA's list of hazardous substances.
The details concerned are recommendations. Please contact the glove supplier for further information. In full contact: 0,7 mm Butyl rubber, >480 min (EN 374-1/-2/-3). In splash contact: 0,4 mm Nitrile rubber, >120 min (EN 374-1/-2/-3).
Safety glasses. (EN 166:2001)
In the event of occupational exposure limits being exceeded or of inadequate ventilation: wear appropriate respiratory protection. Short term: combination filter AX-P2. (DIN EN 14387)
Light protective clothing.
Protect the environment by applying appropriate control measures to prevent or limit emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient conditions (ambient temperature).
See SECTION 10.3.
Evolution of flammable mixtures possible in air when heated above flash point and/or during spraying or misting. Risk of bursting.
Strong heating. See SECTION 7.2.
No information available.
Flammable gases/vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for arecal Markierungsfarbe 360° blau?
The signal word is danger.
What is the physical form of arecal Markierungsfarbe 360° blau?
arecal Markierungsfarbe 360° blau is a aerosol with see product designation color. It has characteristic odor.
What is arecal Markierungsfarbe 360° blau used for?
Paint
What are the hazard statements for arecal Markierungsfarbe 360° blau?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of arecal Markierungsfarbe 360° blau?
The melting point is not applicable and the boiling point is not applicable.