Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Anreiss-Spray_Marking Spray
- Synonyms
- Marking Spray BLUE, Marking Spray RED
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Restricted to professional users.
Manufacturers & Suppliers
Artur Gloeckler GmbH
manufacturer
Poststr.6, D-63796 Kahl am Main
+49 6188 9174 0
http://www.gloeckler.com
Emergency Contacts
GIZ-Nord, Goettingen
+49 551 19240
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of pigments, polyester resin, solvent and propellant.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If victim is at risk of losing consciousness, position and transport on their side.
After contact with skin, wash immediately with: Water. Change contaminated clothing. In case of frostbite, wash with plenty of water; do not remove clothing.
Symptoms: Can cause frostbite.
If product gets into the eye, keep eyelid open and rinse immediately with large quantities of water, for at least 5 minutes. Subsequently consult an ophthalmologist.
Symptoms: Causes serious eye irritation.
If swallowed, immediately drink: Water.
Immediate Medical Attention
In case of accident or unwellness, seek medical advice immediately. Subsequently consult an ophthalmologist.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2). Foam. Extinguishing powder. Use water spray jet to protect personnel and to cool endangered containers.
High power water jet. D powder.
Combustible. Vapours may form explosive mixtures with air. Pressurised container: May burst if heated.
Remove heat to avoid pressure rise.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition. Provide adequate ventilation. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Wear personal protection equipment.
Do not allow to enter into surface water or drains. (Explosion hazard.)
Absorb with liquid-binding material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe gas/fumes/vapour/spray. Do not spray on naked flames or any incandescent material.
Keep in a cool, well-ventilated place.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of prolonged or frequently repeated skin contact: Suitable material: NBR (Nitrile rubber). Thickness of glove material: 0,65 mm, penetration time (maximum wearing period): > 120 min On short hand contact: Hand protection: CR (polychloroprenes, Chloroprene rubber). Thickness of glove material: 0,65 mm. penetration time (maximum wearing period): >10 min
Goggles.
Respiratory protection necessary at: insufficient ventilation. Filtering device (full mask or mouthpiece) with filter: A
Wear anti-static footwear and clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The mixture is chemically stable under recommended conditions of storage, use and temperature.
Extremely flammable aerosol.
This material is combustible and can be ignited by heat, sparks, flames, or other sources of ignition (e.g. static electricity, pilot lights, or mechanical/electrical equipment). In use may form flammable/explosive vapour-air mixture.
Keep away from heat. Ignition hazard. Pressurised container: May burst if heated.
Alkali metals, Oxidizing agents.
Thermal decomposition can lead to the escape of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Limited quantity: see SP277
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Anreiss-Spray_Marking Spray known by?
Anreiss-Spray_Marking Spray is also known as: Marking Spray BLUE, Marking Spray RED
What is the hazard signal word for Anreiss-Spray_Marking Spray?
The signal word is danger.
What is the physical form of Anreiss-Spray_Marking Spray?
Anreiss-Spray_Marking Spray is a aerosol with pigmented color. It has like: isopropyl alcohol. odor.
What is the solubility of Anreiss-Spray_Marking Spray?
mixable with most organic solvent cleaners
What is Anreiss-Spray_Marking Spray used for?
Restricted to professional users.
What are the hazard statements for Anreiss-Spray_Marking Spray?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Anreiss-Spray_Marking Spray?
The melting point is not relevant and the boiling point is approx. - 40 °C.