Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BORNIT® emulsion for Asphalt Repair Mortar
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Binder for Asphalt Repair Mortar. Sector of uses [SU] SU 19: Building and construction work
Uses advised against
All uses that are not stated are advised against
Manufacturers & Suppliers
BORNIT-Werk Aschenborn GmbH
manufacturer
Reichenbacher Straße 117, 08056 Zwickau, GERMANY
0375 2795 0
http://www.bornit.de
Emergency Contacts
Labor
+49-375-2795-0
Mo-Do. 07:00 Uhr-15:30 Uhr, Fr. 07:00 Uhr- 13:00 Uhr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (Z)-N-9-octadecenyl-1,3-diaminopropane EC: 230-528-9 | 7173-62-8 | 1% | Yes |
| di-(2-hydroxypropyl) C16-C18 (evennumbered), C18 unsaturated-alkyl amine EC: 695-977-9 | 1309955-79-0 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Call a doctor if you feel unwell.
Take off contaminated clothing and wash it before reuse.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately.
Rinse mouth thoroughly with water. Get medical advice/attention if you feel unwell.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.
Full water jet
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection equipment. Remove persons to safety.
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
Wipe up with absorbent material (eg. cloth, fleece).
Materials: absorbent material (eg. cloth, fleece)
Related Products
Similar products with comparable safety profiles
BORNIT® mixture of crushed stones for Asphalt Repair Mortar
---
AR Mortar Liquid
---
3M™ Bornitrid Spray TG
---
Elevate EPDM Solvent Free Bonding Adhesive
---
Thin bed mortar
---
High Heat Mortar
---
Everbuild Mitre Fast Activator
---
Easy-Mix RK-7100 Structural Acrylic Adhesive Hardener
UFI: D960-4051-500A-4CHE
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures are necessary. Wear personal protection equipment (refer to section 8).
Keep cool. Protect from sunlight. storage temperature 5-35°C Keep container tightly closed in a cool, well-ventilated place.
When using do not eat, drink, smoke, sniff. Avoid contact with skin, eyes and clothes.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If local exhaust ventilation is not possible or not sufficient, the entire working area should be ventilated by technical means.
Tested protective gloves must be worn EN ISO 374. Suitable material: NBR (Nitrile rubber), Permeation time (maximum wear duration): 480 min. Suitable material: NR (natural rubber, Natural latex), Permeation time (maximum wear duration): 10 min.
goggles EN 166
Respiratory protection necessary at: spray application (Filter type: AP 3)
spray application: Disposable suit
No data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
No known hazardous reactions.
No hazardous reaction when handled and stored according to provisions.
Further information on proper storage: see section 7.
Oxidizing agent
Does not decompose when used for intended uses.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BORNIT® emulsion for Asphalt Repair Mortar?
The signal word is no signal word.
What is the physical form of BORNIT® emulsion for Asphalt Repair Mortar?
BORNIT® emulsion for Asphalt Repair Mortar is a liquid with brown color. It has charakteristisch odor.
What is BORNIT® emulsion for Asphalt Repair Mortar used for?
Binder for Asphalt Repair Mortar. Sector of uses [SU] SU 19: Building and construction work
What are the hazard statements for BORNIT® emulsion for Asphalt Repair Mortar?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of BORNIT® emulsion for Asphalt Repair Mortar?
The melting point is not determined and the boiling point is not determined.