Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Blacktop Asphalt Filler & Sealant
- Product Code
- 1000701
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Caulking Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200, Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Transportation
1-800-535-5053
Transportation
1-352-323-3500
Poison Control
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Asphalt | 8052-42-4 | 30 - 60% | Yes |
| Calcium Carbonate | 471-34-1 | 15 - 40% | Yes |
| Stoddard solvent | 8052-41-3 | 10 - 30% | Yes |
| Attapulgite | 12174-11-7 | 3 - 7% | Yes |
| Cellulose | 9004-34-6 | 3 - 7% | Yes |
| Silica, crystalline | 14808-60-7 | 0.1 - 1% | Yes |
| Isopropyl alcohol | 67-63-0 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If breathing is difficult, leave the area to obtain fresh air. If continued breathing difficulty is experienced, get medical attention immediately. Move the person to fresh air. If breathing has stopped, apply artificial respiration. Call a doctor.
Symptoms: respiratory tract irritation, headache, dizziness, nausea, gastrointestinal disturbances, coughing, a sensation of dryness and pain in the nose, throat and chest, confusion and unconsciousness
Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately if continued breathing difficulty is experienced, if symptoms persist (skin), or if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
Vapor from this material will readily ignite at temperatures above 150 degrees F if an ignition source is present. Vapors may form an explosive mixture with air at temperatures above 150 degrees F. Eliminate sources of ignition: heat, electrical equipment, sparks and flames. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.
Wear self contained breathing apparatus for fire fighting if necessary.
Firefighter Protection
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Immediately eliminate sources of ignition. Contain spilled material and remove with inert absorbent. Dike to prevent entering any sewer or waterway. Transfer liquid to a holding container. Scrape up dried material and place into containers.
No Information
remove with inert absorbent, Scrape up dried material and place into containers
Materials: inert material
Related Products
Similar products with comparable safety profiles
Blacktop Asphalt Low VOC Sealant
---
Textured Concrete Latex Filler & Sealant
---
Concrete Siliconized Filler & Sealant
---
Textured Mortar Premium Elastomeric Latex Filler & Sealant
---
Gutter & Flashing Butyl-Flex Rubber Sealant
---
Concrete Patcher & Resurfacer Dry Mix
---
Concrete Patcher & Resurfacer Dry Mix
---
Touch N Seal One-Component All-Season Foam Sealant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Provide adequate ventilation. Keep containers closed when not in use. Avoid heat, sparks and open flames. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use in well ventilated area. Wash thoroughly after handling.
Store away from sources of ignition and heat. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.
Wash thoroughly after handling.
Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal temperatures and pressures.
Excessive heat and freezing. Keep away from open flames, hot surfaces and sources of ignition. Avoid contact with skin, eyes and clothing.
Open flames, hot surfaces and sources of ignition. Strong oxidizing agents, strong acids and strong bases.
Carbon monoxide, carbon dioxide, nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3175
- Shipping Name
- Solids containing flammable liquid, n.o.s.
- Transport Class
- 4.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Blacktop Asphalt Filler & Sealant?
The signal word is danger.
What is the physical form of Blacktop Asphalt Filler & Sealant?
Blacktop Asphalt Filler & Sealant is a solid appearing as paste with black color. It has strong solvent odor.
What is Blacktop Asphalt Filler & Sealant used for?
Caulking Compound
What are the hazard statements for Blacktop Asphalt Filler & Sealant?
This substance has 5 hazard statements:
- H228: Flammable solid.
- H315: Causes skin irritation.
- H335: May cause respiratory irritation.
- H350: May cause cancer.
- H372: Causes damage to organs through prolonged or repeated exposure.