Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT
- Product Code
- 17040, 007040
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
LUBRICANT • WIRE CLEANER
Manufacturers & Suppliers
CRC INDUSTRIES (AUST) PTY LIMITED
manufacturer
9 Gladstone Road, Castle Hill, NSW, 2154, AUSTRALIA
(02) 9849 6700
http://www.crcindustries.com.au
Emergency Contacts
PIC
13 11 26
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue flushing with water until advised to stop by a Poisons Information Centre or a doctor.
If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes.
For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed, do not induce vomiting.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry agent, carbon dioxide or foam.
Non flammable. May evolve toxic gases (carbon oxides, hydrogen chloride, chlorides, phosgene, hydrocarbons) when heated to decomposition.
Evacuate area and contact emergency services. Remain upwind and notify those downwind of hazard. Use waterfog to cool intact containers and nearby storage areas.
Firefighter Protection
Wear full protective equipment including Self Contained Breathing Apparatus (SCBA) when combating fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear area of all unprotected personnel. Ventilate area where possible. Contact emergency services where appropriate.
Prevent product from entering drains and waterways.
cover / absorb spill with non-combustible absorbent material (vermiculite, sand, or similar), collect and place in suitable containers for disposal.
Materials: non-combustible absorbent material (vermiculite, sand, or similar)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation.
Store in a cool, dry, well ventilated area, removed from incompatible substances, heat or ignition sources and foodstuffs.
Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas.
removed from heat or ignition sources
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical explosion proof extraction ventilation is recommended. Maintain vapour levels below the recommended exposure standard.
Wear PVA or viton® gloves.
Wear splash-proof goggles.
Wear a Type A (Organic vapour) respirator. At high vapour levels, wear an Air-line respirator. If spraying, wear a Full-face Type A-Class P1 (Organic gases/vapours and Particulate) respirator or an Air-line respirator. Where the boiling point is < 65°C, use an AX filter type.
Wear coveralls.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended conditions of storage.
Hazardous polymerisation is not expected to occur.
Avoid heat, sparks, open flames and other ignition sources.
oxidising agents (e.g. hypochlorites), acids (e.g. nitric acid), alkalis (e.g. sodium hydroxide), metals, heat and ignition sources.
May evolve toxic gases (carbon oxides, hydrogen chloride, chlorides, phosgene, hydrocarbons) when heated to decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1593
- Shipping Name
- DICHLOROMETHANE
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT?
The signal word is danger.
What is the physical form of WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT?
WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT is a clear liquid appearing as clear liquid . It has ether like odour odor.
What is WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT used for?
LUBRICANT • WIRE CLEANER
What are the hazard statements for WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H340: May cause genetic defects.
- H350: May cause cancer.
What is the melting point of WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT?
The melting point is NOT AVAILABLE and the boiling point is NOT AVAILABLE.