Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lavender Clean® Pine-Sol® Multi-Surface Cleaner
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
General purpose dilutable cleaner
Uses advised against
No information available
Manufacturers & Suppliers
The Clorox Company
manufacturer
1221 Broadway Oakland, CA 94612
1-510-271-7000
Emergency Contacts
Medical Emergencies
1-800-446-1014
Chemtrec
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C10-14, ethoxylated | 66455-15-0 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is affected, call a doctor.
Rinse skin with plenty of water. If irritation persists, call a doctor.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Get medical attention immediately if irritation persists.
Symptoms: Stinging and irritation of eyes.
Drink a glassful of water. Call a poison control center or doctor immediately. DO NOT induce vomiting unless told to do so by a poison control center or doctor.
Immediate Medical Attention
Get medical attention immediately if irritation persists. Call a poison control center or doctor immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
CAUTION: Use of water spray when fighting fire may be inefficient.
No information available
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with eyes. Refer to protective measures listed in Sections 7 and 8.
See Section 12 for additional ecological Information
Absorb and containerize. Wash residual down to sanitary sewer. Contact the sanitary treatment facility in advance to assure ability to process washed-down material.
Related Products
Similar products with comparable safety profiles
Original Pine-Sol® Multi-Surface Cleaner
---
Original Pine-Sol® Multi-Surface Cleaner
---
CloroxPro® Pine-Sol® Multi-Surface Cleaner, Lavender Clean®
---
LYSOL® Power & Fresh Multi-Surface Cleaner - Fresh, LYSOL® Clean & Fresh Multi-Surface Cleaner - All Scents
---
Simple Green® All-Purpose Cleaner
---
Toilet Cleaner Pine & Mint
UFI: 7EF2-VNG8-280P-XKW1
Surface Cleaner Spray
---
Formula 409® Multi-Surface Cleaner
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with eyes, skin, and clothing. Do not eat, drink, or smoke when using this product.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink, or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers Eyewash stations Ventilation systems
If splashes are likely to occur, wear safety glasses with side-shields. None required for consumer use.
If irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.
No special protective equipment required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data available.
None under normal processing.
None known.
None known.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lavender Clean® Pine-Sol® Multi-Surface Cleaner?
The signal word is warning.
What is the physical form of Lavender Clean® Pine-Sol® Multi-Surface Cleaner?
Lavender Clean® Pine-Sol® Multi-Surface Cleaner is a slightly viscous liquid appearing as clear with lavender color. It has lavender, floral, fruity odor.
What is Lavender Clean® Pine-Sol® Multi-Surface Cleaner used for?
General purpose dilutable cleaner
What are the hazard statements for Lavender Clean® Pine-Sol® Multi-Surface Cleaner?
This substance has 1 hazard statement:
- H319: Causes eye irritation
What is the melting point of Lavender Clean® Pine-Sol® Multi-Surface Cleaner?
The melting point is No data available and the boiling point is No data available.