NextSDS Logo
Safety Data Sheet EN

Pine Cleaner and Deodorizer

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Pine Cleaner and Deodorizer
Product Form
Liquid
Product Code
2105 BRI

Regulatory Identifiers

CAS Number
N/A

Identified Uses

General/Multi-Purpose Cleaner

Uses advised against

For Industrial and Institutional Use Only

Manufacturers & Suppliers

BradyPLUS logo

BradyPLUS

global supplier

7055 Lindell Road, Las Vegas, NV 89118

(877) 788-PLUS

http://BradyPLUS.com

Emergency Contacts

Chemtrec

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.

Precautionary Statements

P280 Wear protective gloves: < 1 hour (breakthrough time): disposable vinyl. Avoid breathing vapor. Contaminated work clothing must not be allowed out of the workplace.
P363 Wash contaminated clothing before reuse. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice or attention.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Alcohols, C9-11, ethoxylated 68439-46-3 3% No
Pine oil, synthetic Chinese 8002-09-3 0.3% No

Occupational exposure limits, if available, are listed in Section 8.

Notes

Any concentration shown as a range is to protect confidentiality or is due to batch variation.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: No known significant effects or critical hazards.

Skin contact

Wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Symptoms: May cause an allergic skin reaction. Adverse symptoms may include the following: irritation, redness.

Eye contact

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.

Symptoms: No known significant effects or critical hazards.

Ingestion

Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: No known significant effects or critical hazards.

Immediate Medical Attention

Get medical attention if irritation occurs. Get medical attention if adverse health effects persist or are severe. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use an extinguishing agent suitable for the surrounding fire.

Unsuitable media

None known.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate ventilation.

Small spill

Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Cleanup methods

Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Wash spillages into an effluent treatment plant.

Materials: water, inert dry material, non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8). Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing vapor or mist. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.

Storage

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good general ventilation should be sufficient to control worker exposure to airborne contaminants.

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated. < 1 hour (breakthrough time): disposable vinyl

Eyes

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side-shields. Recommended: safety glasses with side-shields

Respiratory

Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use.

Skin/Body

Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Environmental

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Clear. Green.-Yellow.
Colour
Clear. Green.-Yellow.
Colour Intensity
---
Form
---
Odor
Pine.
Odor Threshold
Not available.
Ph
8.5 to 9.5
Melting Point
Not available.
Boiling Point
Not available.
Flash Point
Closed cup: Not applicable. [Product does not sustain combustion.]
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
ethanol: 42.95 mm Hg (5.7 kPa) at 20°C; water: 17.5 mm Hg (2.3 kPa) at 20°C; alpha-Pinene: 5.18 mm Hg (0.69 kPa) at 20°C (OECD 104); (R)-p-mentha-1,8-diene: 1.5 mm Hg (0.2 kPa) at 20°C; formaldehyde: 1 mm Hg (0.13 kPa) at 20°C; Terpinolene: 0.76 mm Hg (0.1 kPa) at 20°C; 1,7,7-Trimethylbicyclo[2.2.1]heptan-2-one: 0.65 mm Hg (0.087 kPa) at 20°C; alpha-Terpineol: 0.049 mm Hg (0.0065 kPa) at 20°C; citric acid: 0.000000017 mm Hg (0.0000000023 kPa) at 20°C; 1,3-bis(hydroxymethyl)-5,5-dimethylimidazolidine-2,4-dione: 0 mm Hg (0 kPa) at 20°C; tetrasodium ethylene diamine tetraacetate: 0 mm Hg (0 kPa) at 20°C
Vapor Density
---
Relative Density
1
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
tetrasodium ethylene diamine tetraacetate: >200 °C (>392 °F); trisodium nitrilotriacetate: >200 °C (>392 °F); (R)-p-mentha-1,8-diene: 237 °C (458.6 °F); dipentene: 237 °C (458.6 °F); alpha-Pinene: 255 °C (491 °F); formaldehyde: 430 °C (806 °F); ethanol: 455 °C (851 °F) (DIN 51794); 1,7,7-Trimethylbicyclo[2.2.1]heptan-2-one: 466 °C (870.8 °F); citric acid: 1010 °C (1850 °F)
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not applicable.
Solubility In Water
Not available.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

No specific data.

Incompatible

No specific data.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

Product/ingredient name: Alcohols, C9-11, ethoxylated Result: Acute EC50 5.36 mg/l Fresh water; Species: Crustaceans - Ceriodaphnia dubia - Neonate; Exposure: 48 hours Result: Acute EC50 2686 μg/l Fresh water; Species: Daphnia - Daphnia magna - Neonate; Exposure: 48 hours Result: Acute LC50 8500 μg/l Fresh water; Species: Fish - Pimephales promelas; Exposure: 96 hours

Toxicity

Toxicity | Product/ingredient name | Result | Species | Exposure | | --- | --- | --- | --- | | Pine oil, synthetic Chinese | Acute EC50 24.5 ppm Fresh water | Daphnia - Daphnia magna | 48 hours | | | Acute LC50 18.35 ppm Fresh water | Fish - Oncorhynchus mykiss - Juvenile (Fledgling, Hatchling, Weanling) | 96 hours |

Persistence and degradability

Not available.

Bioaccumulative potential

Not available.

Mobility in soil

Soil/water partition coefficient (Koc) : Not available.

Other adverse effects

No known significant effects or critical hazards.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.

Disposal

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Pine Cleaner and Deodorizer?

The signal word is warning.

What is the physical form of Pine Cleaner and Deodorizer?

Pine Cleaner and Deodorizer is a liquid. appearing as clear. green.-yellow. with clear. green.-yellow. color. It has pine. odor.

What is Pine Cleaner and Deodorizer used for?

General/Multi-Purpose Cleaner

What are the hazard statements for Pine Cleaner and Deodorizer?

This substance has 1 hazard statement:

  • H317: May cause an allergic skin reaction.

What is the melting point of Pine Cleaner and Deodorizer?

The melting point is Not available. and the boiling point is Not available..