Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HYSTER CHAIN LUBE 0171350 400 ML
- Product Code
- NAH001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
MOTIP DUPLI B.V.
manufacturer
Wolfraamweg 2 NL- 8471 XC Wolvega The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 629058130
24 h/d, 7 d/wk
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propane EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| Naphtha (petroleum), hydrotreated light (< 0,1 % benzol CAS nr. 71-43-2) EC: 921-024-6 | 64742-49-0 | 12.5 - 20% | Yes |
| pentane EC: 203-692-4 | 109-66-0 | 12.5 - 20% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 10 - 12.5% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 10 - 12.5% | Yes |
| Amine neutralized phosphoric acid esters | --- | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.
Ensure adequate ventilation.
Related Products
Similar products with comparable safety profiles
HYSTER LIFT TRUCK LUBE 0171351 400 ML
---
HYSTER BRAKE CLEANER PROFESSIONAL 3060380 500 ML
---
LUBE-MATIC® Wire Kleener and Lubricant - 3.75 oz
---
GRF LUBRICANT JR 700G*12 L49
CAS: 8009-03-8
MOTIP CYCLING CHAIN CLEANER GEL 400 ML
---
MOTIP CUT & DRILL LUBRICANT 500 ML
---
MS Lubricant
---
133K ANTI-SEIZE LUBRICANT 8OZ
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 °C, i.e. electric lights. Do not pierce or burn, even after use.
Store in a cool location. Protect from heat and direct sunlight. Observe official regulations on storing packagings with pressurised containers.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HYSTER CHAIN LUBE 0171350 400 ML?
The signal word is danger.
What is the physical form of HYSTER CHAIN LUBE 0171350 400 ML?
HYSTER CHAIN LUBE 0171350 400 ML is a aerosol with according to product specification color. It has characteristic odor.
What is HYSTER CHAIN LUBE 0171350 400 ML used for?
Lubricant
What are the hazard statements for HYSTER CHAIN LUBE 0171350 400 ML?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of HYSTER CHAIN LUBE 0171350 400 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..