NextSDS Logo
Safety Data Sheet EN

YALE CHAIN LUBE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
YALE CHAIN LUBE
Product Code
NAY001

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Manufacturers & Suppliers

M

MOTIP DUPLI B.V.

manufacturer

Wolfraamweg 2, NL- 8471 XC Wolvega, The Netherlands

+31 (0)561 694400

Emergency Contacts

Emergency Contact

+31 (0)561 694400

08.00 / 17.00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

GHS Pictograms

GHS02 - Flammable

GHS02

GHS04 - Compressed gas

GHS04

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Extremely flammable aerosol.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P273 Avoid release to the environment.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
propane EC: 200-827-9 74-98-6 12.5 - 20% Yes
Naphtha (petroleum), hydrotreated light EC: 265-151-9 64742-49-0 12.5 - 20% Yes
pentane EC: 203-692-4 109-66-0 12.5 - 20% Yes
butane EC: 203-448-7 106-97-8 10 - 12.5% Yes
isobutane EC: 200-857-2 75-28-5 10 - 12.5% Yes
Amine neutralized phosphoric acid esters --- 0.1 - 1% Yes

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Generally the product does not irritate the skin.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Drink plenty of water and provide fresh air. Call for a doctor immediately.

Immediate Medical Attention

Call for a doctor immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Unsuitable media

Water with full jet

Firefighter Protection

No special measures required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.

Cleanup methods

Ensure adequate ventilation.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special measures required. Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care.

Storage

Store in a cool location. Observe official regulations on storing packagings with pressurized containers. Keep container tightly sealed. Protect from heat and direct sunlight.

Fire prevention

Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Ph
---
Form
Aerosol
Kinematic Viscosity
---
Solubility In Water
Not miscible or difficult to mix.
Freezing Point
---
Partition Coefficient
---
Bulk Density
---
Physical State
Aerosol
Flammability
---
Auto Ignition Temperature
285°C (545°F)
Appearance
---
Dynamic Viscosity
---
Evaporation Rate
---
Odor Threshold
---
Density
0.67629 g/cm³ (at 20°C)
Physical State Data
aerosol
Decomposition Temperature
---
Cloud Point
---
Upper Explosive Limit
10.9 Vol %
Solubility
---
State Under Standard Conditions
---
Colour
According to product specification
Odor
Characteristic
Relative Evaporation Rate
---
Softening Point
---
Lower Explosive Limit
1.1 Vol %
Molecular Weight
---
Boiling Point
Not applicable, as aerosol.
Solubility In Fat
---
Explosive Limits
---
Relative Density
---
Properties Status
---
Voc Content
---
Vapor Pressure
3500 hPa (2625 mm Hg) (at 20°C)
Solidification Point
---
Melting Point
Undetermined.
Colour Intensity
---
Flash Point
< 0°C (< 32°F)
Vapor Density
---
Crystallisation Point
---
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Hazardous reactions

No dangerous reactions known.

Avoid

No decomposition if used according to specifications.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for YALE CHAIN LUBE?

The signal word is danger.

What is the physical form of YALE CHAIN LUBE?

YALE CHAIN LUBE is a aerosol with according to product specification color. It has characteristic odor.

What is YALE CHAIN LUBE used for?

Lubricant

What are the hazard statements for YALE CHAIN LUBE?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of YALE CHAIN LUBE?

The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..