Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CHAIN & WIRE LUBRICANT
- Product Code
- R220
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC24: Lubricants, greases, release products
Manufacturers & Suppliers
TYGRIS Industrial
manufacturer
Unit 31, Kyle Road Industrial Estate, Irvine, Ayrshire, KA12 8LE
+44 (0) 1294 311 066
Emergency Contacts
TYGRIS
+44 (0) 1294 311 066
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| MINERAL OIL (REFINED) EC: 265-155-0 | 64742-52-5 | 30 - 60% | No |
| HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <5% N-HEXANE EC: 921-024-6 | --- | 10 - 30% | Yes |
| BUTANE EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| ISOBUTANE EC: 200-857-2 | 75-28-5 | 1 - 5% | Yes |
| CHLORINATED PARAFFIN C14-C17 (51%) EC: 287-477-0 | 85535-85-9 | 1 - 5% | Yes |
| XYLENE EC: 215-535-7 | 1330-20-7 | 1% | Yes |
| WHITE SPIRIT EC: 919-446-0 | 64742-82-1 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the exposed person to fresh air at once. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Keep the affected person warm and at rest. Get prompt medical attention.
Wash the skin immediately with soap and water. Get medical attention if any discomfort continues.
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
DO NOT INDUCE VOMITING! Rinse mouth thoroughly with water and give large amounts of milk or water to people not unconscious. Get medical attention if any discomfort continues.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Powder. Dry chemicals, sand, dolomite etc. Water spray, fog or mist.
Aerosol cans may explode in a fire.
Containers close to fire should be removed or cooled with water. Use water to keep fire exposed containers cool and disperse vapours.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear necessary protective equipment. Extinguish all ignition sources. Avoid sparks, flames, heat and smoking. Ventilate. Let evaporate. Keep out of confined spaces because of explosion risk. If leakage cannot be stopped, evacuate area.
Let evaporate.
Related Products
Similar products with comparable safety profiles
WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT
---
Wire Aide[™] Wire Pulling Lubricant
---
LUBE-MATIC® Wire Kleener and Lubricant - 3.75 oz
---
HYSTER CHAIN LUBE 0171350 400 ML
---
YALE CHAIN LUBE
---
LUBRICANT FOR PIPE THREADING AND METAL FORMING
---
MS Lubricant
---
DRILLING LUBE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks and open flame. Avoid spilling, skin and eye contact. Ventilate well, avoid breathing vapours. Use approved respirator if air contamination is above accepted level.
Aerosol cans: Must not be exposed to direct sunlight or temperatures above 50°C.
Avoid skin and eye contact.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate general and local exhaust ventilation.
Use protective gloves.
Wear approved chemical safety goggles where eye exposure is reasonably probable.
No specific recommendation made, but respiratory protection must be used if the general level exceeds the recommended occupational exposure limit. Use chemical cartridge protection with appropriate cartridge.
Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
Avoid heat, flames and other sources of ignition.
Strong oxidising agents. Strong alkalis. Strong mineral acids.
Fire creates: Vapours/gases/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Dangerous for the environment if discharged into watercourses.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste and residues in accordance with local authority requirements.
Dispose of waste and residues in accordance with local authority requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The Aerosol Dispensers (Amendment) Regulations 2014 No.1130; Workplace Exposure Limits EH40; Introduction to Local Exhaust Ventilation HS(G)37.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CHAIN & WIRE LUBRICANT?
The signal word is danger.
What is the physical form of CHAIN & WIRE LUBRICANT?
CHAIN & WIRE LUBRICANT is a aerosol with brown color. It has characteristic odor.
What is the solubility of CHAIN & WIRE LUBRICANT?
Insoluble in water
What is CHAIN & WIRE LUBRICANT used for?
PC24: Lubricants, greases, release products
What are the hazard statements for CHAIN & WIRE LUBRICANT?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated
- H336: May cause drowsiness or dizziness.
- H362: May cause harm to breast-fed children.
- H411: Toxic to aquatic life with long lasting effects.